Industrial Clamps And Fittings Directory

The Industrial Clamps & Fittings Directory section from Process Controls and Instrumentation Buyers Guide is a comprehensive directory resource of manufacturers and suppliers in Canada.

The Industrial Clamps & Fittings Directory offers a comprehensive range of industrial fittings, flowmeter fittings, sanitary fittings and industrial clamps from the world's leading manufacturers.


BPE Biopharm Fittings

Top Line Biopharm fittings feature a sanitary finish suitable for the most demanding pharmaceutical or other ultra-pure applications. They are also a perfect match for today's high speed automatic welding equipment with specifications that meet or exceed ASME BPE standards for dimensions, marking and surface finish.

Butt-Weld Fittings

Top Line offers sanitary weld fittings in sizes 1/2" through 10" OD. Fittings are provided standard with A 25-32RA ID/OD surface finish. Other polish combinations are available upon request. Sanitary weld fittings are 3A approved and are precision crafted from either 304 or 316L stainless steel.

Flowmeter Fittings T-Fittings

Fittings for IP80, TX80 and EX80-Series flowmeters

Flowmeter Fittings Saddles

Saddle-type fittings for IP80, TX80 and EX80-Series and IP and TX100-Series flowmeter

Flowmeter Fittings Weld Fittings

Weld on fittings for IP80, TX80 and EX80-Series flowmeters

Food, Dairy and Beverage Fittings

Rugged, easy to install bevel seat and John Perry fittings are stocked in a standard polished finish that surpasses 3A requirements. Optional unpolished finishes are also available. Constructed of type 304 or 316L stainless steel, these ACME thread union fittings are available in O.D. sizes 1" through 4".

Industrial Bulkhead Fittings

Hayward’s BFA Series Industrial Bulkhead Fittings (Tank Adapters) easily permit safe, quick pipe connections to be made to plastic, metal or plastic tanks. Simply cut the proper size opening in the tank, slide the body of the fitting through it, and then just tighten the nut.

Installation Fittings

FC50P (1/2") and FC75P (3/4") are low cost polypropylene gland fittings, used to mount 12mm pH, ORP, Conductivity and DO electrodes. They allow for installation into threaded tees or can be reversed and attached to a female coupling on the end of your pipe for submersion use.

pH Electrode Sanitary Tri-Clover Fitting

The SF1 sanitary fittings match up to a 1" or 1-1/2" Tri-Clover stub connection. the SF2 match up to a 2" Tri-Clover stub connection. Use these 316 SS fittings for mounting 12 mm diameter pH, ORP (REDOX), or conductivity electrodes into Tri-Clover sanitary piping systems.

Self-Aligning Bulkhead Fittings

Hayward Self-Aligning Bulkhead Fitting allow straight piping connections to be made to the tops of domed tanks or other curved surfaces. A swivel ball connection corrects for the curved surface, not other fittings or piping is required.

T-I Line Fittings and Specialty Fittings

With each joint consisting of a male and female ferrule, Top Line T-I Line Fittings assure a positive seal and a rigid joint. Available in sizes 1" through 4" in material types 304 and 316L stainless steel. Gasket material includes PTFE, Buna and Viton®, with wing nut or bolted high-pressure clamps available out of inventory.

  Industrial Clamps

Clamp Fittings

Top Line clamp fittings are a fast, sanitary, secure solution to your process piping requirements. These fittings are offered in type 304 or 316L stainless steel and are available in polished finishes that meet or exceed 3A standards. Choose from 1" through 12" diameters. We also offer gaskets for your clamp fittings in a variety of FDA approved materials, including Buna N, EPDM, Teflon and more.

Hose Clamps

Stainless steel hose clamps secure hoses at the hose connection.

Your Source For Process Controls And Instrumentation News

About Us

Our Publisher and Owner has been involved in the Canadian Process Control Market for over 35 years. As a former publisher and founder of one of our competitor's print publications in 1992 he left and began his own print magazine known as The Complete Process Products Book which evolved into Process Controls and Instrumentation News. In 1999 we created which contained an online Buyers Guide. We further evolved to the web site you see today and began to develop and maintain web sites for our clients. We introduced The Process News in February 2004 with a worldwide circulation of 43,000 readers providing up-to-date information on the latest products.


Process News

Process News bi-weekly newsletter is sent out every second Tuesday to over 45,000 readers worldwide. Process News was designed to make it easy to obtain product information, get quotes, contact manufacturers or their representatives. The pages that follow contain the latest information supplied to us from manufacturers and their representatives on new products or services offered to the process controls and instrumentation market. Twice per month the Process News newsletter will be sent to you from Process Controls and Instrumentation. Each newsletter will contain the latest up-to-date product information available. Click Here to see the latest newsletter.

Sample Content

Process Controls and Instrumentation provides an indepth Buyers Guide of products. We provide a Company Directory of manufacturers and representatives. We offer an Industrial Pump Directory and offer a Product Site Directory and a Directory of Pumps By Type. We provide a section of easy to understand Process Control Terminology. We provide a Video Library of videos on the latest products. We offer a section on Web Site Design and Advertising Opportunities on this web site.

Get in Touch