|
|
Bidirectional Pressure Transducers
- Honeywell Data Instruments
The EA-BD and SA-BD Bidirectional Pressure Transducers from Data Instruments, Honeywell Sensing & Control sense pressure above and below atmospheric pressure without using a vacuum reference chamber. The transducers give a 1 VDC output at a set negative pressure. Their output signal is 1-6 VDC. EA-BD's are gauge models and SA-BD's are sealed. They find wide use in applications where pressures can go from below atmospheric to considerably above - such as in medical respirators or refrigeration.
|
|
|
Compact High Precision Pressure Transducer - Kobold Instruments
- Ranges: -30" Hg to 15,000 PSIG
- Fittings: ¼" male NPT or 7/16-20 SAE
- Wetted Materials: 316 SS
- Accuracy:
Standard: ±0.5% FS
Optional: ±0.25% FS
- Output: 4-20 mA, 0-5 VDC, 0-10 VDC
|
|
|
Differential Pressure Transducers - Enercorp Instruments
Differential Pressure Transducers Model WGT-420 have been developed primarily for HVAC and similar applications. Model WGT-420 Differential Pressure Transducers convert a differential or gauge air pressure signal to a 4-20 mA signal. The new silicone sensor offers excellent performance characteristics at a low cost. A signal conditioning circuit runs as a two wire 4-20mA device.
|
|
|
Differential Pressure Transmitters - Dwyer Instruments
A wide variety of differential pressure transmitters from Dwyer Instruments featuring intrinsically safe, compact, wet/wet, fixed range, DIN rail, low range and explosion proof differential pressure transmitters.
|
|
|
Digital Pressure Switch - Kobold Instruments
- Switching range: 0-30" Hg Vacuum to 0-5800 PSIG
- Fitting: 1/4" NPT, 1/2" NPT, 304 SS
- Housing: 304 SS
- Max. temperature:176 °F (media)
- Semiconductor PNP/NPN, digital display, programmable
|
|
|
Digital Pressure Transmitter - Kobold Instruments
- Measuring range: 0-30" Hg Vacuum to 0-5800 PSIG
- Fitting: 1/4" NPT, 1/2" NPT, 304-Ti SS
- Housing: 304 SS
- Max. Temperature: 176 °F(media)
- Analog output 0(4)-20 mA, programmable digital display
|
 |
Economic Pressure Transducers/Transmitters - Heaters Controls And Sensors
Designed for a wide range of pressure measuring. The pressure transducers/transmitters are made 100% from stainless steel or die-casting aluminum in mass production.
|
|
|
Harsh Duty Pressure Transducer - Honeywell Data Instruments
The harsh duty SA pressure transducer from Data Instruments, Honeywell Sensing & Control has a water resistant, stainless steel case for complete protection from harsh environments. Internal hermetic sealing is used to provide measurement of absolute pressures (PSIA) or pressures referenced to a sealed chamber (PSIS). The SA produces a high level voltage output of 1-6V output from an unregulated supply.
|
|
|
High Precision Pressure Transmitter - Kobold Instruments
- Ranges: -30" Hg to 60,000 PSIG
- Fittings: ¼", ½" male NPT or 9/16-18 aminco
- Wetted Materials: 316 SS
- Accuracy:
Standard: ±0.25% of FS
Optional: ±0.12% of FS
- Output: 4-20 mA, 0-5 VDC, 1-5 VDC, 0-10 VDC
|
|
|
Industrial Pressure Transducers - ONEhalf20
The ITS Industrial Pressure Transducers are designed for the tough environments of hydraulic applications with the possible prescence of corrosive materials.
The ITS Industrial Pressure Transducers feature the reliable Bendix style 6 pin connector and 3.0 mV/Volt output as standard. The units offer 1/8 X 27 NPT female process connection as standard.
|
|
|
Industrial Pressure Transmitters - ONEhalf20
The ITMA or V Industrial Pressure Transmitters are designed for the tough environments of hydraulic applications with the possible prescence of corrosive materials.
The ITMA or V Industrial Pressure Transmitters feature the reliable Bendix style 6 pin connector and either 4-20mA or 0 - 10 Vdc output. The units offer 1/8 X 27 NPT female process connection as standard.
|
|
|
Low Cost Pressure Transmitter
- Honeywell Data Instruments
The XPRO pressure transmitter from Data Instruments, Honeywell Sensing & Control provides both the instrument engineer and OEM designer with a reliable and affordable measurement. The 4-20 mA output signal is particularly suited for long cable runs in electrically noisy environments. The XPRO pressure transmitter is recognized by Underwriters Laboratories as an intrinsically safe device for use in hazardous locations.
|
|
|
Melt Pressure Sensors
Melt Pressure Sensors from ONEhalf20 are available in two unique Styles. The CT style is the classic melt pressure sensor with a 6" rigid stem and 18" of flex capillary for optimum thermal isolation. The RT style offers only a 6" rigid stem. Both styles come standard with the 6-pin Bendix style bayonet connector, and a 1/2-20 UNF mounting thread.
|
|
|
Melt Pressure Transducers - ONEhalf20
ONEhalf20 offers a complete line of Melt Pressure Transducers for extrusion and polymer processing. All units feature as standard the 6 pin Bendix style bayonet connector, and offer the industry standard 3.33 mV/Volt output.
|
 |
Melt Pressure Transducers - FuzyPro
Developed and made 100% from stainless steel in mass production. Our melt pressure transducers are suit to measuring and controlling the pressure of some high temperature melts such as chemical fiber, plastic, rubber and petrifaction or other over proof liquids.
|
|
|
Melt Pressure Transmitter
The RT6MA or V Melt Pressure Transmitter is ideal for general purpose melt pressure applications. The unit features either 4-20mA or 0-10Vdc output, and offers pin-to-pin compatibility with all competitors models utilizing the Bendix style 6 pin bayonet connector.
|
|
|
OEM Pressure Transmitter - Kobold Instruments
- Internal ceramic measuring element
For relative pressure
- Measuring range: 0-30" Hg Vacuum to 0-7500 PSIG
- Fitting: 1/4", 1/2" NPT, 304 SS
- Accuracy class: ± 0.5%/ ± 1.0% of FS
- Analog output
|
|
|
OEM Pressure Transducer - Blue Ribbon Corp
They provide performance & economy for a wide range of general purpose applications. These series features an all welded stainless steel measuring cell for optimum media compability.
|
|
|
Pressure Transducer - Honeywell Data Instruments
The Mediamate® pressure transducer provides you with the corrosion resistance of stainless steel at low OEM pricing. It is fully compensated and completely interchangeable without further calibration. The Mediamate's wetted parts and outer case are made from 300 series stainless steel. It is now being used with a wide variety of corrosive media such as Freon®, ammonia, water and hydraulic fluids. Its rugged construction and proven reliability make it truly cost effective.
|
|
|
Pressure Transducer - Honeywell Data Instruments
The Mediamate® pressure transducer provides you with the corrosion resistance of stainless steel at low OEM pricing. It is fully compensated and completely interchangeable without further calibration. The Mediamate's wetted parts and outer case are made from 300 series stainless steel. It is now being used with a wide variety of corrosive media such as Freon®, ammonia, water and hydraulic fluids. Its rugged construction and proven reliability make it truly cost effective.
|
|
|
Pressure Transducers - Honeywell Data Instruments
The EA Series of pressure transdcuers from Data Instruments, Honeywell Sensing & Controlis designed for OEM uses requiring high output and corrosion-resistance. It is well-suited for the cycling regimes found in automatic equipment, robots and hydraulic systems. Its pressure port, amplifier and voltage supply regulator are packaged in a Valox case. The EAF Series of pressure transducers from Data Instruments, Honeywell Sensing & Control outputs a low frequency digital signal which is ideal for electrically noisy environments as well as applications requiring long distance signal transmission or an interface to a microprocessor. The output signal is a frequency modulated square wave set from 1 to 6 kHz.
|
|
|
Pressure Transducers - Setra Systems, Inc.
Setra Systems, Inc. is a leading designer and manufacturer of pressure, acceleration, and weight sensing devices. Setra’s broad product line is used for many applications in a wide variety of industries. Setra has devoted its engineering and research efforts to the development of transducers and systems based on the highly accurate variable capacitive transduction principle.
|
 |
Pressure Transducers - Heaters Controls And Sensors
For plastic extrusion are used to measure pressure up to 20,000 PSI. Pressure transducers are available with a variety of outputs like 0 - 5 Volts, 4-20 mAmps,1 to 6 VDC 0.1 to 5.1 VDC or millivolts. Measurements can be made in Gage, absolute, Barometric, Differential, compound or vacuum.
|
|
|
Pressure Transducers And Pressure Transmitters - Ashcroft Dresser
Ashcroft pressure transducers and pressure transmitters from Intertechnology Inc., provides a full line of pressure transducers and pressure transmitters with typical output signals from pressure transducers of 4-20 mA, 1-5 VDC, 1-6 VDC, 0-5 VDC, 0-10 VDC. Products range from low range differential pressure transducers to rugged high pressure explosion-proof transducers for use in extreme applications.
|
|
|
Pressure Transducers and Pressure Transmitters - GP:50
GP:50 specializes in precision pressure transdcuers and transmitters for the industrial, petroleum, process, sanitary (flush diaphragm), plastics (melt pressure) and aerospace industries. GP:50's goal is to offer the widest variety of pressure transducers and accessories with competitive pricing and excellent service.
|
|
|
Pressure Transmitters
- Honeywell Data Instruments
The BL pressure transmitter from Data Instruments, Honeywell Sensing & Control has a conventional 4-20 mA output and is available with accuracy's to 0.25%. It has Factory Mutual approval as an intrinsically safe device for use in hazardous areas Class I, Division I, Groups A through G. All PSIS or PSIA BL's are hermetically sealed. The pressure sensitive diaphragm is either 316L or 15-5PH stainless steel, depending on the pressure range selected.
|
|
|
Pressure Transmitters And Pressure Transducers - WIKA Instruments Ltd
A wide variety of pressure transmitters and pressure transducers from WIKA Instruments featuring OEM pressure transmitters, industrial pressure transmitters, hazardous area pressure tranmsitters, sanitary pressure tranmsitters and special purpose pressure tranmsitters.
|
|
|
Smart Differential Pressure Transmitter - Blue Ribbon Corp
Smart differential pressure transmitter - chemical processing, sanitary tank level, water treatment plants.
|
|
|
Standard Pressure Transmitters - Heaters Controls And Sensors
Very accurate and reliable instruments, which convert pressure inputs to current or voltage signals. These transmitters are equipped with a damping element to direct away pressure peaks or liquid hammering from their sensors; hence showing a high level of resistance to mechanical shocks.
|
|
|
Stainless Steel Pressure Transmitters - Enercorp Instruments
Stainless Steel Pressure Transmitters Model PX61 features compact construction, an integral amplifier, 2-wire 4-20mA output signal and extensive medium compatablility. Stainless Steel Pressure Transmitters Model PX61 design provides a 1/2% accurate, low cost pressure transmitter that can operate over a wide temperature range with corrosion resistance.
|
|
|
Submersible Pressure Transducer - Kobold Instruments
- Ranges: 2 PSIG to 300 PSIG
- Accuracy:
Standard: ±0.25% of FS
Optional: ±0.12% of FS
- Process Connection: Nose cone only or nose cone w/ weight
- Wetted Parts
Metals: 316 SS
Nose Cone: ABS Plastic
- Output: 4-20 mA, 0-5 VDC, 0-10 VDC, 0.5-2.5 VDC
|
