|
Ceramic Band Heater (Heaters) - Leads
|
|
|
Partial Coverage Band
Used around large obstruction which holes or cut outs cannot accommodate. 2 piece construction with barrel nuts. shown. Others available.
Back to Top
|
W7
|
Right angle armor cable with fiberglass leads
Specify location and length of leads at time of order.
Back to Top
|
|
|
Shell Overlap
The metal strap is continued over the gap and a hole is provided. This allows for thermocouple mounting without a hole in the heater.
Back to Top
|
W4
|
Armor cable with fiberglass leads
Specify location and length of leads at time of order.
Back to Top
|
W5
|
Metal braid with fiberglass leads
Specify location and length of leads at time of order.
Back to Top
|
W6
|
Fiberglass leads with protective sleeve
Specify location and length of leads at time of order.
Back to Top
|
|
|
Ceramic Band Heater (Heaters) - Terminals
|
T1 
|
10-32 Threaded Terminals
Minimum width required 7/8"
Back to Top
|
T2 
|
10-32 Threaded Terminals
Minimum width required 7/8"
Specify location at time of order.
Back to Top
|
T3 
|
10-32 Threaded Terminals
Minimum width required 2.00"
Specify location at time of order.
Back to Top
|
CTP
|
Ceramic Terminal Covers
Available on all threaded terminals. Covers available separately.
Back to Top
|
TB
|
Sheet Metal Terminal Box
Available with T2 and T3 threaded terminals.
Back to Top
|
EP
|
European Plug
Also available in 90º construction.
Specify location at time of order.
Back to Top
|
