|
Mica Band Heater (Heaters) - Construction
|
|
|
2 Piece Construction
Ease of installation in difficult locations. Recommended for diameters larger than 15". Available with any termination or clamping styles.
Back to Top
|
|
|
Built-in Strap
Barrel nuts provide secure and strong clamping. Also availble in spring loaded designs for larger diameters.
Back to Top
|
|
|
Expandable or Hinged
One piece construction used where heater cannot be slid over the barrel or die. Two sets of terminals required. All terminations available.
Back to Top
|
|
|
Bent Up Flange
Available with any termination style and is only recommended for narrower designs.
Back to Top
|
|
|
Holes and Cutouts
Allow for installation of thermocouples and transducers and give clearance for mounting bolts.
Back to Top
|
  |
Separate Strap
Available in all sizes and configurations. Built-in straps are recommended wherever possible. Typically used in smaller diameters.
Back to Top
|
|
|
Mica Band Heater (Heaters) - Leads
|
W1 
|
Nozzle Style
Fiberglass leads 12" long is standard.
Back to Top
|
W2 
|
Nozzle Style
Fiberglass leads with metal overbraid 12" long is standard.
Back to Top
|
W3 
|
Fiberglass Leads with Metal Braid
Exiting from the edge at 180 degrees from the gap.
Back to Top
|
W4
|
Fiberglass Leads with Armor Cable
Specify location and length of leads at time of order.
Back to Top
|
W5 
|
Fiberglass Leads with Metal Braid
Specify location and length of leads at time of order.
Back to Top
|
W6
|
Fiberglass Leads with Protective Sleeve
Specify location and length of leads at time of order.
Back to Top
|
|
|
Mica Band Heater (Heaters) - Terminals
|
T1
|
10-32 Threaded Terminals
Minimum width required 7/8"
Back to Top
|
T2 
|
10-32 Threaded Terminals
Minimum width required 7/8"
Specify location at time of order.
Back to Top
|
T3
|
10-32 Threaded Terminals
Minimum width required 2.00"
Specify location at time of order.
Back to Top
|
CTP
|
Ceramic Terminal Covers
Available on all threaded terminals. Covers available separately.
Back to Top
|
TB 
|
Sheet Metal Terminal Box
Available with T2 and T3 threaded terminals.
Back to Top
|
EP 
|
90 Degree European Plug
Also available straight out
Specify location at time of order.
Back to Top
|
