Strip Heaters - Mica Strip Heaters

Metal Braid with Fiberglass Leads
Specify location and length of leads at time of order.

Back to Top

90º Armor Cable with Fiberglass Leads
Specify location and length of leads at time of order.

Back to Top

Fiberglass Leads with Protective Sleeve
Leads exit from any edge of heater.
Specify length at time of order.

Back to Top

10-32 Threaded Terminals
Minimum width required- 7/8"

Back to Top

10-32 Threaded Terminals
Minimum width required 7/8"
Specify location at time of order.

Back to Top

10-32 Threaded Terminals
Minimum width required 2.00"
Specify location at time of order.

Back to Top

Fiberglass Leads with Metal Braid
Leads exit midway of either edge.
Specify length at time of order.

Back to Top

Fiberglass Leads with Metal Braid
Leads exit from any edge of heater.
Specify length at time of order.

Back to Top

Sheet Metal Terminal Box
Available with T2 and T3 threaded terminals.

Back to Top

Ceramic Terminal Covers
Available on all threaded terminals.
Covers available separately

CTP
Ceramic terminal covers for 10-24 and 10-32 threads. Supplied in two pieces (base and threaded cap) Sold in pairs.

Back to Top
   

Mica Strip Heaters are available in irregular shapes and can be made to conform to curved surfaces. Mounting holes aid in clamping the heaters to any surface. Holes and cutouts are useful for the installation of thermocouples and for clearance of bolts and other obstructions.

Back to Top