Cube Relay Interval On Timers - TGL Timers
Cube Relay Interval On Timers - TGL Timers
|
|
 |
TGL Timers
TGL series Cube Relay Interval On timers are a unique combination of digital CMOS timing circuitry with a relay output in a compact 2" x 2" configuration. For users of solid-state timers, these units provide the same functional performance as plug-in relay timers, but at significant cost savings. |
Timing Mode
Application of input voltage to the timer energizes the load and starts the time delay. At the end of the time delay, the load is de-energized. Removal and re-application of input voltage re-sets the timer.
|
 |
|
FEATURES |
-
High current carrying capacity up to 20 amps
-
Transient protected
-
100% Load isolation
-
No leakage in N.O. position
-
No heat sinking required
- Available in any time delay period required
|
-
Digital CMOS timing
-
No minimum load required
-
Totally encapsulated for protection from harsh environments
- 100% Operational testing before shipping
|
| BASIC WIRING AND DIMENSIONS |
 |
| SPECIFICATIONS |
Input Voltage:
- VDC: 12,24 or 48
- VAC: 24,48,120 or 230,50/60 Hz
Time Delay:
- Timing Mode: Interval On
- Type: Digital CMOS
- Time Range: 0.2 seconds to 24 hours
1.0 to 1023 seconds
10 to 10230 seconds - Time Adjustment: Factory fixed time period; Variable, with adjustments on timer, or terminals for external resistors or potentiometers
Repeatability: ±5%
Setting Accuracy:
- Fixed time periods: ±10% of nominal time
- Variable time ranges:
- +15% -5% max. time, -10% min. time
Reset Time/Recycle Time: 100 milliseconds
Initiate Time: 6 milliseconds or less
Relay Output:
- Form: Standard - SPST N.O.
Optional - SPST N.C., SPDT |
Relay Life Expectancy:
- Mechanical: 20 million operations
- Electrical: 100,000
- Contact Material: Silver nickel, gold plated, or silver cadmium oxide
Protection:
- Polarity Protection: All DC units have reverse polarity protection
- Transient Protection: 18 joules
- Dielectric Strength: 1800V RMS 60 Hz
Temperature Ranges:
- Storage: -40°C + 85°C
- Operating: -25°C to +85°C
Physical Data:
- Mounting: Surface with one #8 screw
- Connection & termination: 0.25" quick connects
|
| SELECTION PROCEDURE |
| Mode of Operation |
Series |
Input Voltage |
Time Ranges |
Time Adjustment Method |
Relay Output Form |
Options |
| Interval On |
TGL |
- 120 VAC
- 230 VAC
- 24 VAC
- 24-28 VDC
- 48 VAC
- 48 VDC
- 12 VDC
- Any in between AC voltage (specify)
- Any in between DC voltage (specify>
|
VARIABLE TIME PERIODS |
- Variable, integral, knob on timer.
- Variable, external knob remote.
- Fixed, internal, factory set
- Fixed, external resistor remote
|
- SPDT
- SPST
(N.O.)
- SPST
(N.C.) |
H Heavy duty, 10 amps (6 amps relay standard)
J 20 amps
(1.5 HP) |
0001 0.5 to 1 sec.
0001 0.5 to 1 sec.
0010 .1 to 10 sec.
0100 1 to 100 sec.
1000 10 to 1000 sec.
Any range up to 24 hours avaialble. |
| FIXED TIME PERIODS |
Specify time in full seconds or hours folowed by the letter "S" or "H" and the decimal amount of the main time unit.
Examples: 5S5 is 5.5 secs
5H5 is 5.5 hours |
|
