Miscellaneous Controls, Accessories and OEM Replacement Parts
| Count on BWI Eagle for excellence in a wide range of cost-effective specialty products. We carefully research customer needs in the service of providing solutions for the problem situations. All the products you'll find featured on this page are engineered with increased safety and productivity in mind.
|
|
The Eagle High Voltage Grounding Plug
Ground high voltage underground lines safely with the Eagle High Voltage Grounding Plug.
When using high voltage couplers, safely grounding the three power contacts can be difficult. The Eagle High Voltage Grounding Plug has a unique feature which insures that each power conductor is effectively grounded, ONE AT A TIME. The plug is designed such that the power conductors are not connected to each other until AFTER each conductor has been grounded.
The heavy-duty insulated housing provides maximum user protection, while the convenient carrying case keeps the grounding plug contacts clean. |
|
|
|
|
The Stitt Tester
Accurately measure true ground circuit impedance with the Stitt Tester.
In applications such as resistance grounded systems where regulations permit a maximum voltage on equipment frames under ground fault conditions, it is essential that the ground circuit impedance be known.
The Stitt Tester accurately measures ground circuit impedance using a new and unique method which is NOT affected by pilot wire resistance, contact resistance, or other factors affecting conventional methods. |
|
|
|
| The Eagle Tilt Switch Probe
The Eagle Tilt Switch Probe detects spills, plugged chutes, high/low bin levels, belt misalignment, and loss of flow. Constructed of thick-walled stainless steel, this rugged probe outlasts OEM units and is extremely durable and safe.
-
Compatible with all OEM control units
-
Models available in N/O or N/C contacts
-
300 lb-test, steel suspension chain included
|
|
| VIEW SPECS |
pdf |
| |
| The Eagle Slip Switch Tester
The Eagle Slip Switch Tester (SST) searches for faults and jumpers in a slip switch while the conveyor is running. The SST will not shut down the conveyor system unless a fault or jumper is found
|
|
| VIEW SPECS |
pdf |
|
|
| The Eagle Fireman
The Eagle Fireman is a complete fire suppression system designed to put out fires that occur at conveyor belt drives in underground mines.
-
Meets all requirements of CFR 30, Part 75
-
No troublesome solenoid valve
-
Modular components quick & easy to install
-
Audible/Visual Alarm and Flow Switch
-
Two, 50' hoses, each with 8 sprinkler fittings
-
Sprinkler heads open at 165˚
|
|
|
| VIEW SPECS |
pdf |
Miscellaneous Controls, Accessories and OEM Replacement Parts
|
