Current Monitors from Time Mark

Click on the model number or the picture in the table below to view basic Current Monitors information. For complete, printable Current Monitors product information, download the PDF. Adobe® Acrobat® Reader must be installed on your computer in order to open these files.

 
PDF
Model
description
pdficonsmall.gif (153 bytes)
273
Single Phase Current Monitor
A single set-point sensor that can be used as either an over current or under current sensor, depending on the contacts used.
pdficonsmall.gif (153 bytes)
AC Current Transducer
Designed to accept an AC current input, and provide a proportional DC output.
pdficonsmall.gif (153 bytes)
DC Current Monitor
This monitor senses from 1 to 10 amps DC, and is available for 24 or 120 VAC, 40 or 60 Hz supply voltages.
pdficonsmall.gif (153 bytes)
Current Transmitter/Receiver
Consists of two identical modules. One module accepts the input from a standard CT, while the second module is connected to a current monitor.
pdficonsmall.gif (153 bytes)
AC Current Monitor
Used to detect either over current or under current, depending on whether the set-point is set above or below the input current.
pdficonsmall.gif (153 bytes)
AC Current Monitor
The Model 1732 generates its operating voltage from the monitored current line, so no external power supply is required.
pdficonsmall.gif (153 bytes)
3-Phase Current Unbalance Detector
Monitors 3-phase lines to detect an unbalanced current.
pdficonsmall.gif (153 bytes)
Current Sensitive Relay
Monitors a single-phase AC current for an over-current condition.
pdficonsmall.gif (153 bytes)
3-Phase Current Monitor
Designed to monitor all legs of a 3-phase line, and can also be used to monitor three individual single-phase lines.
pdficonsmall.gif (153 bytes)
Motor Load Monitor
Detects an overload or under-load condition on all types of running motors; conveyor motors, elevator motors, mixer motors, submersible pumps, suction pumps, etc.
pdficonsmall.gif (153 bytes)
Current Unbalance Detector
Designed to monitor 3-phase AC current (or compare three single-phase AC currents).
pdficonsmall.gif (153 bytes)
Single Phase Current Monitor
Designed to continuously monitor single-phase AC current.
pdficonsmall.gif (153 bytes)
3-Phase Over/Under Current Monitor
Designed to monitor the current level of a 3-phase line or to compare the currents of three single-phase lines.
pdficonsmall.gif (153 bytes)
Single Phase Current Monitor
Designed for monitoring alternating current in the range of 1-5 amps, at 50 to 400 Hz.

108A,Line,Voltage,Phase,Sequence,Detector,Time,Mark

Time Mark Corporation