Programmable Counter/Timer Led Digital Eagle Controls Model 248P
Model 248P is a microprocessor based, multifunction, multirange, programmable Counter / Timer housed in a 1/16 DIN case which may be panel, wall or DIN rail mounted via it's 11 pin termination using industry standard 11 pin sockets. It features an ultra bright high visibility dual LED display of set point value (green digits 7mm high) and actual 'timing value' (red digits 10mm high).
It has two output relays, one instantaneous and one delay, one LED to indicate counting mode and one LED to indicate timing mode. A third LED indicates 'Count Out' or 'Time Out'.
The 248P has a switch mode power supply for operation across the range 85-265Vac and there is an option of 24Vac/dc.
All functions are accessed via the front facia key pad which is sealed to IP65/NEMA 4 protection.
Count range is 0-9999 and there are six time ranges programmable from the single unit from 0.001 seconds to 99 hours 59 minutes.
Standard start function is 'ON Delay' where the unit will reset on power failure, while 'OFF Delay' mode will not reset on power failure and will resume timing when power is restored to the process. All parameters are held in the E squared PROM memory indefinitely until they are manually changed.
ON Delay, OFF Delay, Repeat Cycle, Pulse Output, UP Count/Timing, DOWN Count/Timing, Add and Subtract (counter only), Sustained start, Momentary start
Specification - CE, UL recognised
Time Ranges (Programmable)
Panel Cut-out: 44mm x 44mm