Large Digit Process Displays From Eagle Controls

MODEL LDDP-2000 Large Digit Process Displays

Large,Digit,Process,Displays,Eagle Controls

The LDDP-2000 is a highly flexible microprocessor based large digit process display with a standard scaleable display range of - 9999 to + 99999. The display is programmable for a wide variety of industry standard inputs, from an infra red (IR) hand held programmer (Model LDDPH, see ordering information). Only one IR programmer is required to programme as many displays (individually) as is required in any application anywhere on a plant.

The LDDP-2000 is suitable for any application where data needs to be viewed from a distance, from the murky environments of heavy processing industries to clean room Laboratory applications.

The LDDP-2000 is available in 4 standard digit sizes, which relate to the viewing distance required for the data being displayed -





Viewing Distance

65ft. / 20 mtrs.
130ft / 40 mtrs
220ft / 70 mtrs
455ft / 140 mtrs

Cat No.

Model 2023
Model 2004
Model 2007
Model 2014

The display's are housed in rugged aluminium enclosures to IP55 / NEMA 12 protection and complete with the hardware for mounting. All wiring connections and input type selection are made via terminals and DIP switches on the rear of the enclosure.

The mounting options are:
  • Panel (models 2.3" and 4" only)

  • Wall, Suspension (all models)


Panel Cut-out

2.3" H100 x L347 x D61mm
4.0" H155 x L584 x D61mm
7.0" H330 x L1140 x D95mm
14.0" H520 x L2160 x D95mm

H105 x L352mm
H160 x L589mm


Remote Hand Held IR Programmer - model LDDPH

Large,Digit,Process,Displays,Eagle ControlsThis feature allows easy ON SITE programming of the display with an easy to use 6 button IR programmer. One programmer is all that is required to re-programme or re-scale the input type on a host of displays anywhere on the plant without major disruption to production.

NOTE :- The LDDPH is required for all 4 sizes of display.

The LDDP-200 is programmable for use with Serial Communications RS-232 or RS-485, its is also programmable for communicating the data by Sending, Broadcasting or Receiving.

Each display is supplied with (two) sample programs for running on a PC. This allows a fast means of checking the operation of a display system.

Application-specific software can be developed by Eagle Controls at very reasonable cost.

Features (All models)

  • Display range - 9999 to + 99999
  • Remote hand held IR programmer
  • Programmable Thermocouple inputs J, K, S, T
  • Programmable PT100/RTD inputs 2 or 3 wire
  • Programmable 0-20mA, 4-20mA, 0-10V, 1-5V inputs
  • Programmable +/- 50mV with Tare and Span facility
  • Programmable Serial Communications RS-232 or RS-485
  • Programmable Serial Communications Send, Broadcast, Receive
  • Programmable Last digit filter 1, 5, 10, 25, 50
  • Programmable Decimal point position
  • Excitation supply for field transmitters 12V at 100mA
  • NEMA 12 enclosure / IP64
  • Universal power supply 90-265Vac, CE, UL, CSA approved

Thermocouple ranges

  • 'J' 0-750 C / 32-1382 F
  • 'K' 0-1200 C / 32-2192 F
  • 'S' 0-1750 C / 32-3182 F
  • 'T' -200 to + 400 C / -328 to 752 F

2/ 3 Wire Pt100/Rtd

  • -200 to + 300 C / -328 to 572 F

Electrical Specification


5 digit seven segment LED Viewing 100 degrees conical

A to D Converter

Accuracy +/- 0.02% of range
Input resistance : Voltage 10M ohm, Current 100 ohm
Stability 30 ppm/C
Conversion rate 1 per second

Power Supply

90-265Vac (24Vac/dc optional consult sales office)

Scaling Method

Digital scaling stored in non-volatile memory
Programming remote infra red
Customer variables, zero, span, last digit filter, decimal point


Operating temperature 0-50 C / 32-122 F
Humidity 0-85% RH noncondensing