GP1000 Series Gauge Protectors and Diaphragm Seals

The GP1000 Series is 3D Instruments' rugged product line of Gauge Protectors and Diaphragm Seals. All seals are precision micro-matched at the 3D factory for accuracy and reliability.

Because 3D's direct drive bourdon element has a fluid path volume of only 2 cc or less, it has about 20 times less volume than standard C-type. The resultant displacement of a 0.08 cc or less allows 3D to offer gauge protection unmatched in the industry, while maintaining accuracy and sensitivity better than any other gauge and seal combination available.

GP140 Metallic Diaphragm Series

GP1000,Series,Gauge,Protectors,Diaphragm,Seals

Applications:

Highly corrosive chemical environments.

Highly viscous processes.

Processes prone to plugging or fouling.

Very high pressure pulsation's.

Service pressures 100-2000**psi.

Not recommended for services below 100 psi without custom span adjustment.

Features:

Welded body of 316 stainless steel or Hastelloy C (other materials available).

Metallic diaphragm of 316L stainless steel or Hastelloy C (other materials available).

Available in 1/4" or 1/2" process connections.

Available with process flush port.

A more compact design than industry standard seals (1-1/2 inch hex, max.)

Low effects on accuracy: 1% on a 100 psi gauge* 0.1% on a 1000 psi gauge *Can be custom spanned for greater accuracy (models KT & KET).

Low temperature effects: (Models KT & KET) 0.2% per 10 deg. F on a 100 psi gauge. 0.03% per 10 deg. F on a 1000 psi gauge.

How To Order

	GP140X-X/X
LOW TEMPERATURE EFFECT
316 SS upper & lower	KT
316 SS upper Hastelloy C lower & diaphragm	KET
GAUGE FITTING:
1/4 inch NPT process connection	B
1/2 inch NPT process connection	C
PROCESS FITTING:
1/4 inch NPT process connection	B
1/2 inch NPT process connection	C

Many additional versions available!

GP400 Pressure Gauge Isolator
The GP400 is the most unique Pressure Gauge Isolator available. The GP400 is the least expensive way to protect the 3D Pressure Gauge from: Corrosion, Freezing, Viscous Liquids or Plugging. The GP400 is suitable for use in fluid services to 20,000 psi. It is not recommended for vacuum or gas applications.

Features:

Low cost

Compact installation within 3D gauge fitting.

Usable range 30-20,000 psi.

SS fitting

Elastomer boot available in Viton & EPDM

Usable to temperatures of -40 deg. F to +190 deg. F

No degradation to accuracy between 100-20,000 psi. Suitable for test gauge protection.

Fill materials available include: Fluorolube, Mineral Oil,
Glycerine, Ethylene Glycol, Silicone Oil (Std.)

GP500 Pressure Gauge Isolator

Installed in a separate fitting with flush port & fill port.

Usable range 100-15,000 psi.

Can be used with electronic transmitters.

Applications:

Viscous fluids

Freeze protection

Heavy gauge dampening

Diaphragm Isolators Specification Guide

Model Number: Used with gauge:

Welded diaphragm or Removable diaphragm

Process or inlet connection size:
a. Threaded type: 1/4" npt 1/2" npt 1"npt Other
b. Flanged type: Pipe size Pipe schedule ASA pressure rating Flange facing

Instrument or outlet connection size: 1/4" npt 1/2" npt

Material of wetted parts: a. Lower housings b. Diaphragm c. "O" rings

Material of upper housing

Fill liquid: Glycerin, Silicone, Mineral Oil, Fluorolube Other

Approximate media operating temperature
Maximum media temperature
Approximate operating pressure
Maximum pressure
Media material
Material used in media piping or housings

Optional Features If Required

Flushing connection
Connecting line (316 SS Capillary)
Clean-out capability (without disturbing fill)

Resources

Isolator Brochure