| Specifications |
| Pressure Ranges: |
25 inches (60 mbar) of water to 15 psig (1000 mbar) |
MOD CODE LISTING
None - "psig" and "in H2O" ranges / scales
"ISZ" - "oz/in2" ranges /scales
"ISB" - "mbar" or "bar" ranges/scales
"ISO" - "kPa" ranges/scales
"ISK" - "kgf/cm2" and "mm H20" ranges/ scales
"ISZD" - Dual scale with "oz/in2" inner scale and "psig"or "in H2O" outer scale
"ISBD" - Dual scale with "mbar" inner scale and "psig"' or "in H2O" outer scale
"ISOD" - Dual scale with "kPa" inner scale and "psig" or "in H2O" outer scale
"ISKD" - Dual scale with "kgf/cm2" or "mm H2O" inner scale and "psig" / "in H2O" outer scale
"CPB" - 0 to 100% linear scale for receiver gauge
"CPA" - 0 to 10 square root scale for receiver gauge
"GCG" - Optional 1.0 % (of Span) Accuracy
"GBT" - Optional Laminated Glass Crystal (Stainless Steel Case Only)
Note: More than one Mod Code can be used at the end of the model number.
|
| Accuracy:
|
+/- 2.0% of full scale +/- 1.0% |
| Ambient Temperature:
|
-65 deg. F to 190 deg. F (-54 deg. C too 88 deg. C) |
| Proof Pressure: |
150% full scale no calibration shift |
| Burst Pressure:
|
500% of full scale |
| Operating Media: |
Any gas media suitable for contact with 316 stainless steel |
| Materials |
| Sensing Element: |
Stainless steel |
| Fitting:
|
316 stainless steel |
| Dial: |
300 series stainless steel |
| Movement:
|
Brass |
| Stainless Steel Case Materials |
| Case:
|
300 series stainless steel electro-polished |
| Crystal: |
Acrylic (or optional glass) |
| Flange: |
300 series stainless steel (optional) |
| High Impact Plastic Case Materials |
| Case: |
High impact resistant Cycolac Plastic |
| Crystal:
|
Acrylic |
| Flange: |
High impact resistant |
