|
 |
|
SmartReader 2 Data Logger
|
 |
SmartReader 2
SmartReader 2 is a data logger for easy and reliable tracking of "air quality" conditions. It has a built-in temperature sensor and a plug-in Relative Humidity sensor. The Relative Humidity sensor is field replaceable so you can always be assured of accurate readings.
|
Four Channel RH and Temperature Data Logger
|
|
SmartReader 2
|
|
Range:
|
0 to 95% (non-condensing) |
|
Resolution:
|
Better than 0.4% between 25 & 60% RH at 25° C (77° F) |
|
Accuracy:
|
+/-4% RH from 10 to 90% (-20° to 40°C [-4 to 104°F]) |
|
Memory Size:
|
32 KB |
|
Accessories:
|
ACR EH-020A Temperature & RH Probe ACR ET Series Temperature Probe |
|
No. of Channels:
|
Four. (One for the internal temperature sensor, one for the internal RH sensor, one for optional external RH and one for optional external temperature or resistance) |
|
Relative Humidity Sensor:
|
Capacitive thin polymer film |
|
Response Time:
|
Adequate ventilation reduces the response time which is approximately 5 minutes in still air |
|
Environmental Conditions:
|
Like all relative humidity sensors, when exposed to contaminants and/or extreme environmental conditions, accuracy degradation could result. For maximum long-term stability, sensor should not be exposed or subjected to organic solvents, corrosive agents (strong acids, SO2, H2SO4, CI2, HCl, H2S, etc.), and strong bases (compounds with PH greater than 7). Dust settling on the sensor surface will not affect sensor performance except possibly to decrease the speed of response. For more information on the RH sensor’s tolerance to chemicals, see Accessories section under Relative Humidity |
|
Remote Network Communications:
|
See Network & Communications |
|
Common Specifications:
|
See Common Specs |
|
Software:
|
See Software |
|
Industry:
|
HVAC, Air Quality, Museums, AeroSpace
|
|
PDF
|
|
|
|
| Size |
107 mm x 74 mm x 22 mm (4.2" x 2.9" x 0.9") |
 |
| Weight: |
110 grams (3.75 ounces) |
|
| Case Material: |
Noryl® Plastic |
|
| Operating Limits: |
-40°C to 70°C (-40°F to 158°F) and 0 to 95% Relative Humidity (non-condensing) |
|
| Clock Accuracy: |
+/-2 seconds per day |
|
| Battery: |
3.6 volt Lithium, 1 Amp-Hour |
|
| Power Consumption: |
5 to 10 microamps (continuous) |
|
| Battery Life: |
10-years warrantied (under normal use) Factory replaceable |
|
| Mounting: |
Magnetic backing or locking eyelet |
|
| Memory Size: |
32 K (32,768 readings) |
|
| Sampling Method: |
1. Continuous (First-in, First-out) 2. Stop when full (Fill-then-stop) |
|
| Sampling Rate: |
User selectable rates between 8 seconds to once every 5 days |
|
| Resolution: |
8 bits (1 part in 256) |
|
| External Connector: |
Removable screw-type terminal strip with Common (-) connection |
|
| PC Requirements: |
IBM PC or 100% compatible running MS® Windows 3.1, '95, '98, or NT, with at least 2 MB RAM, 2 MB of hard drive disk space and one free serial port |
|
| Product Approvals: |
Meets Part 15 for Digital Devices of the Code of Federal Regulations of the Federal Communications Commision (FCC). Meets Class A radiated and conducted emission requirements of Section 2 of the Radio Interference Regulations of Communications Canada. IEC801-2, 3, 4 and EN55011 covering ESD, RFI Immunity, EFT/Burst and Radiated Emissions respectively, for the Commission of the European Communities (CE) |
|
| Resistance to X-Rays: |
Tested for protection against a 160kV dose @ 5mA for 30 seconds (150mA-sec) @ 38 inches F.F.D. (about 100 times that of an airport X-Ray machine). Tested for protection against Gamma Ray (equivalent to 0.137 - 1.38 mega volts) IR 192 - 28 curies @ 30 second exposure source to object distance 5" |
|
|
Powerful Solutions for Instrumentation & Control Problems!
SmartReader 2 Data Logger
|
