Process Controls Home
 
 

Test and Measurement Tools Fluke
Model 718 Pressure Calibrators

Test,Measurement,Tools,Fluke,Model,718,Pressure,CalibratorsFluke’s 1 kilogram answer to pressure calibration

Of course size matters -and so does weight. Particularly if you have to carry your test tools around with you.

The Fluke 718 pressure calibrators are about a third of the size of comparable instruments and weigh just one kilogram.

With its built-in pressure/vacuum pump, the Fluke 718 offers a complete solution for on-site pressure maintenance and calibration.

Out in the field, you’ll really notice the difference.

Measurement Accuracy
Pressure
Fluke 718 30G
Range: -850 mbar to 2 bar (internal sensor) Over Pressure 3xFS
Resolution: 0.1 mbar
Accuracy: 0.05% full scale
Functions: Zero, Min, Max, Hold, Damp
Note: for use with non-corrosive gasses
Fluke 718 100G
Range: -850 mbar to 7 bar (internal sensor) Over Pressure 3xFS
Resolution: 1 mbar
Accuracy: 0.05% of full scale
Functions: Zero, Min, Max, Hold, Damp
Note: for use with non-corrosive gasses
Fluke 718 series
via pressure module connector
Range: 29 pressure modules, 2,5 mbar to 700 bar
Over pressure per pressure module specs
Resolution: Per pressure module specs
Accuracy: To 0.025% of full span, per pressure module specs
Functions: Zero, Min, Max, Hold, Damp
Note: media compatibility per pressure module specs,
Source Pressure, built in pump
Range: -820 mbar to full scale
Supported Pressure Units; psi, in. H20
(4 °C), in. H20 (20 °C), cm H20 (4 °C),
cm H20 (20 °C), bar, mbar, kPa, inHg, mmHg, kg/cm

Technical Data
Loop Power
Range: 24 V dc
Accuracy: +/- 10%
Note: Drive; 20 mA into 1000 W for battery >6.8V; 700 W for battery 5.8 to 6.8 V
Measure Accuracy:
Range: 0 to 24 mA
Resolution: 0.001 mA
Accuracy: 0.025% + 1 count
Display
LCD, 5 digit pressure and current simultaneous

Environmental Specifications
Operating temperature
-10ºC to 55ºC
Storage temperature
-40ºC to 60ºC
Humidity (Without Condensation)
95% (10ºC to 30ºC)
75% (30ºC to 40ºC)
45% (40ºC to 50ºC)
35% (50ºC to 55ºC)
Operating Altitude
3,000m max

Safety Specifications
Safety
CSA C22.2 No. 1010.1:1992
Maximum voltage
30V

Mechanical & General Specifications
Size
210 mm L x 87 mm W x 62 mm
216 mm L x 94 mm W x 67 mm (with holster)
Weight
Approx. 737g
Approx. 992g (with holster)
Warranty
3 years
Shock & Vibration
Random, 2G, 5-500 Hz
1m drop test
Battery type
Two 9V batteries, ANSI/NEDA 1604A or IEC 6LR61
Battery life: 4 to 20 hours, typical, depending on functions


Powerful Solutions for Instrumentation & Control Problems!

Test and Measurement Tools Fluke Model 718 Pressure Calibrators

Site Designed By Panther Marketing