Fluke Multifunction Process Calibrators Model 725

Fluke,Multifunction,Process,Calibrators,Model,725 Now you can source and measure with one affordable tool.

Take along the new Fluke 725 Multifunction Process Calibrators, and you're equipped to test and calibrate almost any process parameter. Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules.

Do you need to calibrate transmitters? The 725's split display lets you view input and output values simultaneously. For valve and I/P tests, you can source mA while measuring pressure. The 725 has auto-stepping and auto-ramping for remote testing, plus 25% stepping for fast linearity tests.

From the moment you pick it up, the Fluke 725 is ready to perform. Its simple controls, without menus, make operation easy. Its memory functions make set up fast. And its rugged design lets it work as hard as you do.

Measurement Accuracy

Voltage DC

30.000 V	0.02%+ 2 counts (upper display)
30.000 V	0.02%+ 2 counts (lower display)
100.00 mV	0.02%+ 2 counts
-10.00 mV to 75.00 mV	0.025 % + 1 count (via TC connector)

0.0 to 400.0 .W	0.1W (4-wire), 0.15W (2- and 3-wire)
401 to 1500 .W	0.5W (4-wire), 1W (2- and 3-wire)
1500 to 3200 .W	1W (4-wire), 1.5W (2- and 3-wire)

Frequency

2.0 to 1000.0 CPM	0.05 % + 1 count
1.0 to 1100.0 Hz	0.05 % + 1 count
1.00 to 10.00 kHz	0.05 % + 1 count
Sensitivity	1 V peak-to-peak-minimum

Pressure

Accuracy	from 0.025% of range using any of 29 pressure modules.
	(for detailed specifications refer to pressure modules in options and accessories)
	Modules available for differential, gage, vacuum, absolute, dual and high pressure.

Source Accuracy

Voltage DC

100.00 mV	0.02%+2 counts
10.000 V	0.02%+2 counts
-10.00 mV to 75.00 mV	0.025 % + 1 count (via TC connector)

Current DC

24.000 mA (Source)	0.02%+ 2 counts
24.000 mA (Simulate)	0.02%+ 2 counts

Resistance

15.0 to 400.0 .W	0.15 W (exc. current 0.15 to 0.5 mA), 0.1 W (exc. current 0.5 to 2 mA)
401 to 1500 .W	0.5 W (excitation current 0.05 to 0.8 mA)
1500 to 3200 .W	1 W (excitation current 0.05 to 0.4 mA)

Frequency

2.0 to 1000.0 CPM	0.05%
1.0 to 1100.0 Hz	0.05%
1.00 to 10.00 kHz	0.25%
Waveform:	5 V p-p squarewave, -0.1 V offset

RTDs and Thermocouples

Measure Accuracy:

NI-120	0.2 �C
PT-100 (385)	0.33 �C
PT-100 (393)	0.3 �C
PT-100 (JIS)	0.3 �C
PT-200 (385)	0.2 �C
PT-500 (385)	0.3 �C
PT-1000 (385)	0.2 �C
Resolution:	0.1 �C
J:	0.7 �C
K:	0.8 �C
T:	0.8 �C
E:	0.7 �C
R:	1.8 �C
S:	1.5 �C
B:	1.4 �C
L:	0.7 �C
U:	0.75 �C
N:	0.9 �C
Resolution	J, K, T, E, L, N, U: 0.1 �C, 0.1 �F B, R, S: 1 �C, 1 �F

Source Accuracy:

NI-120	0.2 �C
PT-100 (385)	0.33 �C
PT-100 (393)	0.3 �C
PT-100 (JIS)	0.3 �C
PT-200 (385)	0.2 �C
PT-500 (385)	0.3 �C
PT-1000 (385)	0.2 �C
Resolution:	0.1 �C
Note:	Accuracy stated for 4-wire measurement.
J:	0.7 �C
K:	0.8 �C
T:	0.8 �C
E:	0.7 �C
R:	1.4 �C
S:	1.5 �C
B:	1.4 �C
L:	0.7 �C
U:	0.75 �C
N:	0.9 �C
Resolution	J, K, T, E, L, N, U: 0.1 �C, B, R, S: 1 �C