Process Controls Home
 
 

Special Application Baths from Hart Scientific

Standard Resistor Baths

Special,Application,Baths,Hart,Scientific

Resistor Baths    Models 7008, 7015, and 7009

Three size options for any quantity of resistors

Stability to ±0.0007°C

Independent high- and low-temperature cutout circuit

Minimal long-term drift

Specifications

7008

7015

7009
 

Range

–5°C to 110°C

0°C to 110°C

0°C to 110°C

Stability at 25°C

±0.0007°C at 25°C (water)
±0.001°C at 25°C (oil)

Uniformity

±0.003°C at 25°C (water)
±0.004°C at 25°C (oil)

±0.003°C at 25°C (water)
±0.005°C at 25°C (oil)

±0.005°C at 25°C (water)
±0.007°C at 25°C (oil)

Temperature Setting

Digital display with push-button data entry

Set-Point Resolution

0.002°C; high-resolution mode, 0.00003°C

Display Resolution

0.01°C

Digital Setting Accuracy

±1°C

Digital Setting Repeatability

±0.01°C

Heaters

500 and 1000 Watts

Cooling Capacity

100 to 200 Watts

Access Opening

12.75" x 7.25"
(324 x 184 mm)

27.5" x 11"
(699 x 279 mm)

27.5" x 22"
(699 x 559 mm)

Bath Chamber Dimensions (unobstructed space)

14.25" W x 10.75" H x 13" D
(1991 cubic inches)

27.5" W x 11" H x 13" D
(3933 cubic inches)

27.5" W x 22" H x 13" D
(7865 cubic inches)

Depth

13" (331 mm)

Wetted Parts

304 stainless steel

Safety Cutout

Factory-set high and low temperatures

Power

115 VAC (±10%), 60 Hz, 15 A or 230 VAC, 50 Hz, 8 A, specify, 1700 W

230 VAC (±10%), 50 or 60 Hz, 12 A, 2600 W (specify frequency)

Volume

11.2 gallons
(42 liters)

25 gallons
(95 liters)

44 gallons
(167 liters)

Weight

135 lb. (61 kg)

310 lb. (141 kg)

330 lb. (150 kg)

Size

24" H x 30.5" W x 19" D
(610 x 775 x 483 mm)

48" H x 44" W x 22" D
(1219 x 1118 x 559 mm)

43" H x 44.5" W x 34" D
(1092 x 1130 x 864 mm)

Automation Package

Interface-it software and RS-232 computer interface are available for setting the bath temperature via an external computer. For IEEE-488, add the 2001-IEEE to the automation package.

Regardless of the size and number of standard resistors you have to maintain, Hart has a bath that will do the job for you. Choose one of the three models described here or call us for information on other sizes.

Like all Hart baths, these resistor baths have unbeatable stability and uniformity. No other baths limit long-term and short-term drift—as well as gradients—better than these baths. Hart’s proprietary controller senses temperature changes as small as 0.00001°C. This controller is the industry’s best-selling temperature calibration controller for bath retrofits because it improves the stability of almost every other poorly performing bath. So why not buy the best to begin with?

Each bath can be delivered with any size resistor rack you want (a standard model is included with each bath), and the Model 7015 has several other special features that make your work easier. A new independent high- and low-temperature cutout provides maximum protection for your standard resistors and their calibration history.

Model 7015

The Model 7015 has a 95-liter tank and a temperature range of 0°C to 110°C. It’s stable to ±0.0007°C.

It has a one-piece stainless steel lid designed to drain spills and splashes back into the bath as you remove resistors. It has a large access opening to make handling large resistors, like the Thomas Design Standard resistors, easier. The tank has an electrically isolated resistor shelf.

This is truly a quality resistor bath, and it’s backed by Hart’s industry-leading service.

Model 7008

This 44-liter bath has a range of –5°C to 110°C and a stability of ±0.0007°C. It’s available with an RS-232 port or IEEE. There are cart options and oil for any application.


Powerful Solutions for Instrumentation & Control Problems!
Special Application Baths from Hart Scientific

Site Designed By Panther Marketing