Process Controls Home
 
 

Surface Dry Well from Hart Scientific

Handheld,Dry,Wells,Hart,ScientificSurface probes are difficult to calibrate because it’s hard to find a flat, heated surface that’s stable and uniform. The Hart Model 9125 Surface Dry-Well gives you the best possible conditions for calibrating surface sensors.

Why buy a non-temperature calibration device designed for test tube sterilization or PC board repair, when you can have a true calibration instrument? It has a uniform surface temperature, it can be used with a reference thermometer and it is extremely easy to recalibrate in-house.

9125 Surface AreaThe test surface is milled aluminum for an absolutely smooth and true calibration work area with maximum thermal conductivity. In addition, it is nickel plated for durability and best surface contact. The 12.25-square-inch test surface is large enough to calibrate more than one sensor at a time.

With an accuracy of ±0.5°C, you can calibrate almost any surface probe, thermistor, thin film sensor, RTD, thermocouple, ribbon sensor or surface mount cutouts, fuses and switches.

Don’t buy “make-do” hot plates when you can have an excellent calibration tool.

  Features

Handles any surface sensor

Uniform temperature on test surface

Reference thermometer well for increased accuracy

Certificate of traceability to NIST


  Specifications

Temperature Range

°C Version: 35°C to 199.9°C
°F Version: 95°F to 400°F

Stability

±0.1°C

Resolution

0.1°C, 1°F

Accuracy

±0.5°C traceable to NIST

Controller

Microprocessor-based PID digital controller, displays actual and set temperatures

Temperature Setting

Digital with push-button data entry

Cooling

Built-in cooling fan

Stabilization

Approx. 10 minutes

Test Surface

Nickel-plated aluminum, 3.5 inches square (89 mm)

Uniformity

Within 2.5 inches square (64 mm2), ±0.2°C; within 3.5 inches square (89 mm2), ±0.4°C

Reference Well

Thermometer test well accessible at the front of the surface test plate for optional use with a calibrated reference probe (.187-inch diameter)

Size

4" H x 7.5" W x 10" D
(102 x 191 x 254 mm)

Power

115 VAC (230 VAC optional, add “-E” to the model number)

Weight

7 pounds (3.2 kg)

Carrying Case

Optional, ABS foam case with O-ring, water tight closing. Foam interior protects surface calibrator and accessories.

Calibration Certificate

Included, with data. States compliance and traceability to NIST standards.



Powerful Solutions for Instrumentation & Control Problems!
Surface Dry Well from Hart Scientific

Site Designed By Panther Marketing