|
IsoPAQ-11L/-12L
1- & 2-channel Loop Powered
Isolators for Separation
of 0(4)-20 mA Signals
IsoPAQ-11L and IsoPAQ-12L are 1- and 2-channel loop powered isolators used for electrical isolation of 0(4)-20 mA signals to avoid measurement errors due to different voltage potentials or ground loops in an instrument installation.
The 2-channel version, IsoPAQ-12L offers a very cost effective alternative combined with a high-density mounting.
The isolators need no power supply, which contributes to reduced installation costs compared to isolation transmitters.
The high reliability ensures a safe system operation and low maintenance costs.
Ordering information
|
 5 Years Warranty
|
|
IsoPAQ-21L/-22L
1- & 2-channel Loop Powered
Isolators for 0(4)-20 mA Signals
with High Isolation and Protective
Separation
IsoPAQ-21L and IsoPAQ-22L are 1- and 2-channel loop powered isolators used for electrical isolation of 0(4)-20 mA signals to avoid measurement errors due to different voltage potentials or ground loops in an instrument installation.
The isolators need no power supply, which contributes to reduced installation costs compared to isolation transmitters.
The high isolation level of 4 kV provides an effective protection for downstream devices.
The 2-channel version, IsoPAQ-22L offers a very cost effective alternative combined with a high-density mounting.
The high reliability and the Protective Separation are additional features that ensure a safe system operation.
Ordering information
|
5 Years Warranty
|
|
CLI22
Loop Powered High-accuracy
Isolators for 0(4)-20 mA Signals
The loop-powered isolator, CLI22, is used for electrical isolation of 0(4)-20 mA signals to avoid measurement errors due to different voltage potentials or ground loops in an instrument installation.
CLI22 also contributes to a suppression of electrical interferences. Thanks to the high isolation level of 4 kV, the isolator also serves as an effective protection for downstream devices against impermissible high voltages.
The isolator is available in a single channel version, CLI22S, and a dual channel version, CLI22D.
Ordering information
|
5 Years Warranty
|
|
IPAQ-L(mA)
Programmable 2-wire
Isolation Transmitter
IPAQ-L(mA) is an active isolation transmitter for mA input signals with a 4-20 mA output in a 2-wire connection. It is suitable for direct connection to the input modules of a control system.
Thanks to the programmable input range and the low input impedance, IPAQ-L(mA) meets almost any need for current signal isolation and load amplification.
Ordering information
|
5 Years Warranty
|
|
IsoPAQ-30P
Basic Isolation Transmitter
for Unipolar mA/V Signals
with Calibrated Range Selection
The Isolation Transmitter IsoPAQ-30P is a low-cost transmitter used for basic isolation and conversion of 0-20 mA, 4-20 mA and 0-10 V unipolar signals.
Due to the calibrated range selection of the input/output signals and the universal power supply, IsoPAQ-30P provides excellent flexibility and low storage and installation costs.
The high reliability ensures a safe system operation and low maintenance costs.
Ordering information
|
5 Years Warranty
|
|
IsoPAQ-40P
High-performance
Isolation Transmitter
for Unipolar mA/V Signals with
Calibrated Range Selection
The Isolation Transmitter IsoPAQ-40P is used for high-precision isolation and conversion of 0-20 mA, 4-20 mA and 0-10 V unipolar signals.
Due to the calibrated range selection of the input/output signals, the selectable bandwidth and the universal power supply, IsoPAQ-40P provides excellent flexibility and low storage and installation costs.
The high reliability and the Protective Separation are additional features that ensure a safe system operation.
Ordering information
|
5 Years Warranty
|
|
IsoPAQ-41P
High-performance
Isolation Transmitter
for Unipolar mA/V Signals with
Fixed Ranges
The Isolation Transmitter IsoPAQ-41P is used for high-precision isolation and conversion of 0-20 mA, 4-20 mA and 0-10 V unipolar signals.
For applications where normally only one signal combination is used, IsoPAQ-41P offers a cost-effective alternative.
The high reliability and the Protective Separation are additional features that ensure a safe system operation.
Ordering information
|
5 Years Warranty
|
|
IsoPAQ-51P
High-performance
Isolation Transmitter for Unipolar
mA Signals with Fixed Range
and Zero/Span Adjustment
The Isolation Transmitter IsoPAQ-51P is used for high-precision isolation of 0(4)-20 mA unipolar signals.
For applications where normally only one signal combination is used, IsoPAQ-51P offers a cost-effective alternative.
The zero and span adjustments allow for a fine-tuning of the measurement loop.
The high reliability and the Protective Separation are additional features that ensure a safe system operation.
Ordering information
|
5 Years Warranty
|
|
DA561
Isolation Transmitter
for mA/V Signals with
2-wire Transmitter Supply
DA561 is specially designed for signal isolation and load amplification in the process industry.
A 2-wire transmitter can be connected to and supplied from the isolation amplifier.
DA561 maintains a high isolation level (1,5 kV) between input and output.
Current and voltage can be chosen independently as input and output signals.
Ordering information
|
5 Years Warranty
|
|
DA562
Dual Channel Isolation
Transmitter for mA/V Signals
DA562 is specially designed for signal isolation and load amplification in the process industry.
Two independent and galvanically isolated channels allow for high-density mounting.
DA562 maintains a high isolation level (1,5 kV) between input, output and the two channels.
Current and voltage can be chosen independently as input and output signals.
Ordering information
|
5 Years Warranty
|
|
IsoPAQ-60P
High-performance
Isolation Transmitter for
Bipolar and Unipolar mA/V Signals
with Extensive Range Selection
and Zero/Span Adjustment
The Isolation Transmitter IsoPAQ-60P is used for high-precision isolation and conversion of 0-20 mA, 4-20 mA and 0-10 V bipolar and unipolar signals.
Due to the extensive range selection with a choice of 144 input/output signal combinations, the selectable bandwidth and the universal power supply, IsoPAQ-60P is a true universal transmitter for any demanding isolation application.
The zero and span adjustments allow for a fine-tuning of the measurement loop.
The high reliability and the Protective Separation are additional features that ensure a safe system operation.
Ordering information
|
5 Years Warranty
|
|
IsoPAQ-70S
Basic Isolation Transmitter
for Unipolar Shunt Voltages
with Calibrated Range Selection
The Isolation Transmitter IsoPAQ-70S is used for isolation and conversion of unipolar shunt voltages into standard mA/V signal.
Due to the calibrated range selection and the universal power supply, IsoPAQ-70S provides excellent flexibility and low storage and installation costs.
The high reliability ensures a safe system operation and low maintenance costs.
Ordering information
|
5 Years Warranty
|
|
IsoPAQ-80S
High-performance Isolation
Transmitter for Bipolar and Unipolar
Shunt Voltages with Extensive
Range Selection and Zero/Span Adjustment
The Isolation Transmitter IsoPAQ-80S is used for high-precision isolation and conversion of bipolar and unipolar shunt voltages into standard mA/V signals.
Due to the extensive range selection, the selectable bandwidth and the universal power supply, IsoPAQ-80S is a true universal transmitter for any demanding shunt voltage isolation application.
The zero and span adjustments allow for a fine-tuning of the measurement loop.
The high reliability and the Protective Separation are additional features that ensure a safe system operation.
Ordering information
|
5 Years Warranty
|
|
IPAQ-4L
Universal High-Isolation
4-wire Transmitter
IPAQ-4L is a fully universal and programmable 4-wire (separately powered) transmitter. The high isolation provides safe and problem free measurements. Offering both current and voltage output, IPAQ-4L meets any process requirements. Designed for wall and DIN-rail mounting.
Ordering information
|
5 Years Warranty
|
