|
 |
Rotronic HygroFlex M Models
|
 |
The HygroFlex M is available in two standard versions which share the following features:
• Interchangeable HygroClip S3 probe with 3 meter (9.8 ft) cable
• Fully user programmable
• Software based probe calibration and instrument configuration
• Internal test connector for HygroPalm calibrator
• 12...35 VDC / 12...24 VAC or 90...264 VAC power |
 HygroFlex M1 : - %RH and temperature
- Analog Outputs
|
HygroFlex M3: - %RH, temperature and calculated value
(dew-point, enthalpy, etc)
- Analog & Digital Outputs
|
|
|
• Two linear analog outputs: 4-20 mA, 0-5V, etc.
• Jumper configuration of analog outputs signal type
• Analog outputs can be configured for practically any
range |
• Three linear analog outputs: 4-20 mA, 0-5V, etc.
• Jumper configuration of analog outputs signal type
• Analog outputs can be configured for practically any range
• RS232 output (optional cable grip)
• Networkable - see below
RS232 first HygroFlex to PC
RS485 between transmitters
• Optional input for analog pressure probe (restrictions apply)
(optional cable grip)
Maximum network cable length: RS232: 150m (490ft) / RS485: 1,000m (3,300ft) between the two furthermost units |
|
Powerful Solutions for Instrumentation & Control Problems!
Rotronic HygroFlex M Models
|
|
