Rotronic HygroFlex Models

Models | Probes| Metal Enclosure Option| Software| Calibration

The HygroFlex is available in three standard versions which share the following features:

• Interchangeable probes
• Fully user programmable
• Software based probe calibration and instrument configuration
• Optional display and keypad
• Test connector for HygroPalm calibrator
• 12...35 VDC / 12...24 VAC or 90...264 VAC power

	HygroFlex 1 : Analog Outputs • %RH and temperature • Two linear analog outputs: 4-20 mA, 0-5V, etc. • Jumper configuration of analog outputs signal type • Analog outputs can be configured for practically any range • One probe input
	HygroFlex 2 : Digital Output • %RH and temperature • Calculated values; dew-point, mixing ratio, etc • RS232 output (%RH and temperature) • Networkable (RS232 first HygroFlex to PC / RS485 between transmitters) • Optional 2nd probe input (digital or analog e.g. pressure)
	HygroFlex 3: Analog & Digital Outputs • %RH, temperature and calculated value (dew-point, mixing ratio, etc) • Three linear analog outputs: 4-20 mA, 0-5V, etc. • Jumper configuration of analog outputs signal type • Analog outputs can be configured for practically any range • RS232 output (%RH and temperature) • Networkable (RS232 first HygroFlex to PC / RS485 between transmitters) • Optional 2nd probe input (digital or analog e.g. pressure)

Maximum network cable length: RS232: 12m (39ft) / RS485: 1,000m (3,300ft) between the two furthermost units.