Interchangeable Probe
A wide range of probes is available to satisfy most application requirements. The HygroClip probes are 100% interchangeable. A probe can be replaced in seconds without affecting measurement accuracy.
Large LC Display
The large LC display shows any two of the following: relative humidity, temp. and calculated parameter. When the HygroPalm is connected to a transmitter, the LCD also displays data from the transmitter.
Five-Button Keypad
(Function Menu)
ON/OFF: also activates the display hold function
MENU: enters or exits the functions menu UP/DOWN: menu navigation, probe input selection ENTER
Easy Access to Battery Compartment
The design of the battery compartment makes it very easy to replace the battery (no tool required). |
|
Probe & RS232 Connectors
Depending on the model, the HygroPalm has up to two probe inputs as well as an RS232 connector. Any probe input can be used to establish a connection with a transmitter.
Robust Housing
Ergonomic and robust ABS housing with rubber ‘grip-strip’.
Optional Docking Station
The optional docking station is used to conserve battery power and/or to reload rechargeable batteries. the docking station can also be used to connect the instrument to a PC for configuration and data logging*.
* Data logging not available with the HygroPalm1.
Receptacle for A/C Adapter Power When connected to an A/C adapter, the docking station can be used to power the HygroPalm or to recharge the battery (rechargeable batteries only).
RS232 Connector |
