| The HygroLab 3 Set is simple to use: |
1) From the keypad of the HygroLab 3, use the MENU key to select the measuring mode.
Note: the HygroLab automatically remembers the last selected mode. |
| 2) During measurements, all probes connected to the instrument run simultaneously. To avoid any confusion, turn off any unused AW-DIO probe, by pressing on the button located on top of the probe. Other probe models: disconnect the unused probes. |
3) Place a product sample inside the sample holder. Put the probe on top of the sample holder.
|
 |
4) AwQuick or AwE mode: start the measurement by pressing on the ENTER key
(keypad of the HygroLab 3)
Example: on the bottom line of the display, the AwQuick mode is indicated by the letter Q, followed by the number 1 (for probe 1), the
time into the measurement and the letter R (process is running)
|
 |
|
|
5) When the measurement is ended, the display freezes and the instrument beeps. Two black rectangles appear to the left of the values and
the letter S (bottom right) indicates that the process has stopped.If more than one probe is connected to the HygroLab 3, the display automatically
switches to each probe as soon as it is done.
The small black triangle at the top of the display indicates which probe is being displayed.
|
 |
