| The HygroPalm AW1 Set is simple to use: |
| 1) From the keypad of the HygroPalm AW1, use the MENU key to select the measuring mode. Note: the HygroPalm automatically remembers the last selected mode. |
|
2) Place a product sample inside the sample holder. Put the probe on top of the sample holder.
|
 |
3) AwQuick or AwE mode: start the
measurement by pressing on the ENTER key (keypad of the HygroPalm AW1)
Example: on the bottom line of the display, the AwQuick mode is indicated by Q1, followed by the time into the measurement and by the letter R (process is running)
|
 |
|
|
4) When the measurement is ended, the display freezes. Two black rectangles appear to the left of the values and the letter S (bottom right)
indicates that the process has stopped. |
 |
