| Fast warm-up coupled with a fast response, less than 1 millisecond, make this transducer ideal for applications that require the highest accuracy. This transducer is designed for accurate differential pressure measurement of liquid or gases compatible with 17-4 PH stainless steel. Available in optional FM Approved Intrinsically Safe design. |
 |
Applications
- High Accuracy General Purpose
- R & D Test and Measurement
- Vacuum Systems
- Dynamometers
- Engine Test Cells
|
| Model 204D Specifications |
| Full Scale Pressure Output |
- Unidirectional:
- 5 VDC
- Bi-directional:
- ±2.5 VDC
|
| Zero Pressure Output |
0 VDC |
Accuracy
(RSS Method) |
±0.11% Full Scale (±10, ±25, ±50 psid [Unidirectional and Bi-directional])
±0.22% Full Scale (±100, ±250, ±500 psid [Bi-directional])
±0.14% Full Scale (10000 psid) |
| Type of Pressure |
Differential |
| Pressure Ranges |
- Unidirectional:
- 0 to 25, 50, 100, 250, 500, 1000, 3000, 5000, 10000 psid
- Bi-directional:
- 0 to ±10, ±25, ±50, ±100, ±250, ±500 psid
|
| Thermal Effects |
- Compensated Range °F (°C):
- 30 to 150 (-1 to 65)
- %FS/100°F(100°C)max.zero:
- ±1.0 (±1.8)
- %FS/100°F(100°C)max.span:
- ±1.0 (±1.8)
|
| Media |
- High Pressure Port:
- Gas or liquids compatible with 17-4PH stainless steel.
- Low Pressure Port:
- Clean dry air or non-corrosive gases (1000 psig max). (Hydrogen not recommended for use with 17-4PH stainless steel.)
|
* Specifications subject to change without notice.
If you don't see what you need here, please contact us.
|
