Trusted Wireless I/O Interface from Phoenix Contact

The Problem: Running cables and conduit to sensors, switches, meters, temperature gauges, pumps, etc. costs money and is difficult or sometimes impossible. Without a link to remote equipment, you have to either run out to check the devices or wait for trouble to start!

The OMNEX Solution: Gives you ability to wire remote devices to a terminal block in the field, and have the signal reliably appear at a terminal block where you need it. No cables or conduit - secure and robust!

One Way Monitoring and Control Solutions

The RAD-ISM-900 series of Trusted Wireless seamlessly bridge the costly communications gap between sensors, switches, alarms and PLCs. Effectively relay signals over great distances and through high interference with these HopLink radios.

Two Way Monitoring & Control Solutions

The RAD-ISM-900-BD-BUS series of DIN rail mount remote I/O Trusted Wireless enable users to move multiple points of discrete and analog updates back and forth between two locations. Flexibility is offered by allowing the user to "stack" different combinations of I/O on the paired RF modules depending on site requirements.

Transmit analog and digital signals from control to remote devices with Phoenix Contact wireless interface modules.

Now you can monitor and control level, flow, pressure, temperature, alarms, etc; while eliminating costs for cable, conduit, trenching and boring.

• One way for monitoring, two-way for control with expandable I/O. Up to 34 analog or 68 digital signals.

• Reliable transmission up to 300m – no line of sight.
  Max. transmission distance: 32 km

• Frequency Hopping Spread Spectrum tolerates high-interference environments.
  No FCC license needed.

• Compact, robust packaging.  No programming required.

Class I, Division 2 approved for hazardous area installations (UL, CUL and CSA approved)
Save time, materials and money that would be spent on cables, conduits and labour!!  
Please find below the ordering information.