Cube Relay Repeat Cycle OFF/ON Timers - TGKA Timers

Cube Relay Repeat Cycle OFF/ON Timers - TGKA Timers


	TGKA Timers TGKA series Cube Relay Repeat-Cycle On/Off timers are a unique combination of solid-state timing circuitry with a relay output in a compact 2"x2" configuration. They have equal "On" and "Off" times. These timers offer many advantagaes of a relay output and provide the same functional performance as plug-in relay timers, but at a significant cost savings.
Timing Mode Application of input voltgae to the timer starts the "On" time delay, and energizes the load. At the end of the "On" time delay, the load is de-energized, and the "Off" time delay starts. At the end of the "Off" time delay, the load is again energized, the timer returns to the "On" time delay, and the cycling continues as long as input voltage is applied. Removal of the input voltage resets the timer.

FEATURES
High- current capacity up to 10 amps 100% load isolation No leakage in N.O. postion No heat sinking required Available in any time delay period required Digital CMOS timing	Transient protected No minimum load required Totally encapsulated for protection from harsh environments 100% Operational testing before shipping

BASIC WIRING AND DIMENSIONS

SPECIFICATIONS
Input Voltage: VDC: 12, 24, or 48 VAC: 24, 48, 120, or 230, 50/60 Hz Time Delay: Timing Mode: Repeat-Cycle Off/On Type: Digital CMOS Available Time Range: 0.2 seconds to 24 hours Time Adjustment: Factory-fixed time period; variable, with knob on timer, or terminals for external resistor or potentiometer Repeatability: 0.5% Setting Accuracy: Fixed time period: 10% of nominal time, Variable time range: +15% max. time, -10% min. time Reset/Recycle Time: 25 milliseconds Initiate Time: 6 milliseconds or less Life Expectancy: Mechanical: 20 million operations		Electrical: 100,000 operations at maximum load Contact Material: Silver nickel, gold plated, or silver cadmium oxide Relay Output: Form: Standard – SPST N.O. Optional – SPST N.C., SPDT Rating: Standard – 6 amps (resistive) Optional – 10 amps (resistive) Protection: Polarity Protection: All DC units have reverse polarity protection Transient Protection: 18 joules Dielectric Strength: 1800V RMS 60 Hz Temperature Ranges: Storage: -40° C to +85° C Operating: -25° C to +85° C Physical Data: Mounting: Surface with one #8 screw Connection & Termination: 0.25" quick connects

SELECTION PROCEDURE

Mode of Operation

Series

Input Voltage

Time Ranges

Time Adjustment Method

Relay Output Form

Options

Repeat-Cycle Off/On

TGKA

VARIABLE TIME PERIODS

0001 .05 to 1 sec.
0010 .1 to 10 sec.
0100 1 to 100 sec.
1000 10 to 1000 sec.

Any range up to 24 hours available on special order.

FIXED TIME PERIODS

Specify time in full seconds or hours followed by the letter “S” or “H” and the decimal amount of the main time unit.
Examples:

H Heavy Duty,10 amps (6 amps relay standard

J 20 amps/ 1.5 HP (6 amps relay standard)