Solid-State Output, Delay On Break Timers, TH3ML Timers, Airotronics

  Products

Solid-State Output Delay On Break Timers - TH3ML Timers

Solid-State Output Delay On Break Timers
TH3ML Timers

The TH3ML timers are solid-state output delay on break timers in a fully encapsulated 2" x 2" case. Time adjust can be with on-board potentiometer, external resistor or factory fixed time.

Timing Mode

Input voltage is applied continuously. Upon closure of the normally open live external switch, the load is energized, and remains energized as long as it is closed. When the external initiate switch opens, the time delay is started. At the end of the time delay, the load is de-energized, and the timer is ready for another cycle.

FEATURES
  • Digital timing, solid-state output
  • 1 Amp current handling
  • 10 Amps single AC cycle surge handling
  • ±0.1% Repeat accuracy
  • Factory fixed or variable timing adjust
  • Single screw mounting through center mounting hole
  • Standard 6.35mm (.250) quick connect blade terminals
  • 100% Operational testing before shipping
BASIC WIRING AND DIMENSIONS
SPECIFICATIONS
Input Voltage:
  • VAC: 24, 120
  • VAC: 230 (±20%)
Initiate: Switched line voltage

Time Delay:
  • 0.1 sec. to 24 hours (1 sec., 10 sec., 100 sec., and 1000 sec. are standard)
  • Special time ranges available upon request
Repeatability: +0.1% (under fixed conditions)

Reset/Recycle Time: 150 milliseconds maximum

Initiate Time:16 milliseconds

Solid-State output Form:
  • Normally open 1 Amp steady state - 10A single cycle surge
Life Expectancy:
  • No predictable failure if used within operating parameters
Protection:
  • Transient Protection: 18 joules
  • Dielectric Strength: 1800 RMS 60 Hz
Temperature Ranges:
  • Storage: -40°C + 85°C
  • Operating: -40°C to +75°C
Physical Data:
  • Surface mount with single #8 or #10 screw
  • Totally encapsulated
SELECTION PROCEDURE
Mode of
Operation		 Series Input Voltage Time Ranges Time Adjustment
Method
Delay on Break TH3ML
  1. 120 VAC
    50/60 Hz
  2. 230 VAC
    50/50 Hz
  3. 24 VAC
    50/60 Hz
VARIABLE TIME PERIODS
  1. Variable, integral,
    knob on timer.
  2. Variable, external,
    knob remote.
  3. Fixed, integral,
    factory set
  4. Fixed, external,
    remote resistor
0001 .1 to 1 sec.
0010 .1 to 10 sec.
0100 1 to 100 sec.
1000 10 to 1000 sec.
Any range up to 24 hours avaialble.
FIXED TIME PERIODS
Specify time in seconds (S)
or hours (H)
Example: 400S is 400 sec.
                 05H5 is 5.5 hrs.


Site Designed and Maintained By Panther Marketing & Design