Solid-State Dip-Switch Timers - THL11023E Timers

Solid-State Dip-Switch Timers - THL11023E Timers


	THL11023E Timer THL11023E is a solid-state timer in a compact 2" x 2" configuration. Any time period between 1 second and 1023 seconds is available in 1 second increments and can be set with the dip switch. The advanced digital circuitry provides this timing module with unsurpassed accuracy and reliability.
Timing Mode Application of input voltage to the timer energizes the load and starts the time delay. At the end of the time delay, the load is de-energized. Removal and re-application of input voltage re-sets the timer.

FEATURES
Operates at 120 or 230 volt, 50/60Hz Time range of 1 to 1023 seconds in 1 second increments Binary dip-switch is easy to program Digital timing accuracy Time setting accuracy of 5% of set point Repeatability of 0.1% Extremely low off-state leakage current Eliminates contactor “hum”	Compact, easy to hook up, in-line installation Vertical mounting option available with MB-1 Bracket Totally encapsulated for protection from harsh environments 100% Operational testing before shipping

BASIC WIRING AND DIMENSIONS

SPECIFICATIONS
Repeat Accuracy: 0.1% under fixed conditions Timing Ranges: 1 - 1023 seconds in 1 sec. increments Reset Time: 300 milliseconds during timing cycle Timing Tolerance: ±10% max/±5% typical Mode of Opertaion: Interval On Delay Operating Temperature: -25° C to +85° C Storage Temperature: -40° C to +85° C Transient Protection:18 joules/varister	Voltage Drop in "On" State: 4 volts max/3 volts nominal at 1 amp peak Output Leakage Current in "Off" State: 6.4 mA at 265 VAC 3.3 mA at 120 VAC 1.6 mA at 48 VAC 1.0 mA at 24 VAC Switching Current: 1 amp steady state max 10 mA min 10 amps inrush Weight: 3 oz. (85g) maximum Solid-State Output: SPST (N.O.) Load Current: 1 amp continuous, 10 amps single-cycle surge Time Cycle Interrupt: Resets timer to original state (Input Voltage Break)

SELECTION PROCEDURE

Mode of Operation

Series

Input Voltage

Time Ranges

Time Adjustment Method

Interval On Delay

THL
Standard Sixe
(2" x 2")

1 120 VAC

2 230 VAC

Variable Time Periods

1 to 1023 sec.

(in 1 sec. increments)