ACT,Tachometer,Specifications,Monarch,Instrument

  Products

ACT Tachometer Specifications from Monarch Instrument

Specifications
ACT-1B
ACT-1B-60
ACT-2A
ACT-3A
ACT-3
Speed Range 5-99,999 RPM 5-999,990 RPM (Speeds below 5 RPM possible with multiple pulses/revolution)
Accuracy ±1 RPM ±0.0015% of reading
Resolution 1 RPM
.

Range (RPM)---Resolution

5.000-9.9999          0.000
10.000-99.999        0.001
100.00-999.99        0.01
1000.0-9999.9        0.1
10,000-99,999        1
100,000-499,999    10
500,000-999,990    10

Input Signals

 0-5 V TTL or 1.1-50 Vac

Input Configuration 1 pulse/revolution 60 pulses/revolution 1 or multiple pulses/revolution. Front panel push button programmable
Alarm Output N/A Form C relay contacts, rated 1A at 115Vac
Alarm Capability N/A Two alarm set points each, front panel programmable as either high or low, latching or non-latching. Hysteresis and low limit lockout are programmable.
Analog Outputs

 

 

 

Optional: Current Output (IO): 4-20mA (12 bit) OR Analog Output (AO): 0-5Vdc (12 bit) **Must specify full scale RPM for each option** N/A

Voltage Output 0-5Vdc and Current Output 4-20mA. Panel programmable for common full scale RPM or offset ranges. Example: 0V=3600 RPM / 5V=5000 RPM

ACT Series Panel Tachometers Ordering Information

ITEM NO.
MODEL
DESCRIPTION
6140-050 ACT-1B/115 Tachometer - 5 to 100,000 RPM, with one pulse per revolution and115 Vac power
6140-060 ACT-1B/230 Same as ACT-1B/115, but with 230 Vac power
6140-070 ACT-1B/12 Same as ACT-1B/115, but with 12 Vdc power
6140-052 ACT-1B/115 IO Tachometer - 5 to 100,000 RPM, with Current Output, 4-20 mA, one pulse per revolution and 115 Vac power - Specify Factory Preset Full Scale RPM (Example: 20 mA = 5,000 RPM)
6140-062 ACT-1B/230 IO Same as ACT-1B/115 IO, but with 230 Vac power
6140-072 ACT-1B/12 IO Same as ACT-1B/115 IO, but with 12 Vdc power
6140-051 ACT-1B/115 AO Tachometer - 5 to 100,000 RPM, with Analog Output, 0-5 Vdc, one pulse per revolution and 115 Vac power - Specify Factory Preset Full Scale RPM (Example: 5 Vdc = 10,000 RPM)
6140-061 ACT-1B/230 AO Same as ACT-1B/115 AO, but with 230 Vac power
6140-071 ACT-1B/12 AO Same as ACT-1B/115 AO, but with 12 Vdc power
6140-053 ACT-1B/115 PO Tachometer - 5 to 100,000 RPM, with TTL Pulse Repeater Output, one pulse per revolution and 115 Vac power
6140-063 ACT-1B/230 PO Same as ACT-1B/115 PO, but with 230 Vac power
6140-073 ACT-1B/12 PO Same as ACT-1B/115 PO, but with 12 Vdc power
6140-054 ACT-1B/115-60 Tachometer - 5 to 100,000 RPM, with 60 pulses per revolution and 115 Vac power
6140-064 ACT-1B/230-60 Same as ACT-1B/115-60, but with 230 Vac power
6140-020 ACT-2A/115 Tachometer/Totalizer - 5 to 999,990 RPM - 1 to 99,999 counts, with programmable push button for single or multiple pulses/rev. and 115 Vac power
6140-022 ACT-2A/230 Same as ACT-2A/115, but with 230 Vac Power
6140-023 ACT-2A/12 Same as ACT-2A/115, but with 12 Vdc Power
6140-030 ACT-3/115 Tachometer/Totalizer - 5 to 999,990 RPM - 1 to 99,999 counts, with programmable push button for single or multiple pulses/rev., ao and Io w/offset 12 bit A/D, PO, TTL, 2 alarms, RS232 and 115 Vac power
6140-032 ACT-3/230 Same as ACT-3/115, but with 230 Vac power
6140-033 ACT-3/12 Same as ACT-3/115, but with 12 Vdc power

ACT Series Panel Tachometers Accessories

ITEM NO.
MODEL
DESCRIPTION
1065-2022-001 4633 3-wire shielded Sensor Cable, bulk lengths - Specify total length
6180-070 T-5 Reflective Tape - 5 foot roll, 0.5 inch wide
6180-079 T-5WP Waterproof Reflective Tape (honeycomb pattern) - 5 foot roll, 1 inch wide
5190-105 CAL-N.I.S.T. N.I.S.T. Traceable Certificate of Calibration / Re-Calibration


ACT Tachometer Specifications from Monarch Instrument

Site Designed and Maintained By Panther Marketing & Design