 All New
X-Strobe Series
the most powerful machine vision stroboscopes we offer. If you demand high intensity Xenon light for your fiber optic application, this is it!
Available in two models X-400 and X-1200
click here for more information
 LSSC/115 shown with optional ROS-5
|
MVS-2200 shown with optional MVS-24
adapter and fiber optic bundle
|
LSSC/155 and LSSC/230
slow/stop action in large areas |
MVS-2027, 2067, 2200 SERIES |
MVS-2600 Series
|
MVS-7000 Series
shown with optional
MVS-24 adapter and fiber optic bundle
|
MVS-2600 SERIES
highest flash rates |
MVS-7000 SERIES
the powerful light output |
Monarch provides a wide range of self-contained Machine Vision Strobe Lighting Systems for permanently mounted applications on printing presses, vision systems and offset web machines.
MVS 2027, 2067, 2200 SERIES
The three most popular models are identical in every respect except the MVS-2067 and MVS-2200 provide higher flash repetition rates at lower flashlamp input energies than the MVS-2027. Each unit is contained in a robust industrial enclosure with two connectors, one for the input power line and the other for signal level inputs.The Xenon light is focused onto a port configured for mounting a fiber optic bundle. Many accessories are available, Backlight Panels and Barrel Lens which allow the unit to act similar to a parabolic light.
MVS 2027, 2067, 2200 SPECIFICATIONS
| Optical Specifications |
|
|
MVS-2027 |
MVS-2067 |
MVS-2200 |
| Spectral Bandwidth |
300 - 1100 + nm |
300 - 1100 + nm |
300 - 1100 + nm |
| Photometric Output (1) |
6 lumen-sec |
3 lumen-sec |
1.2 lumen-sec |
| Radiometric light output (1) |
50 mJ |
25 mJ |
10 mJ |
| Flash rate per second |
20 max |
60 max |
200 max |
| Input energy per flash (2) |
2.16 joules
max |
0.72 joules
max |
0.18 joules
max |
| Light output pulse duration (3) |
20 µsec |
12 µsec |
5 µsec |
| Flashlamp life |
>108 flashes maintaining > 70% light output |
| Fiber bundle diameter |
0.2 to 0.5 inches (5 to 13 mm) |
| Electrical Specifications |
|
| Line input voltage (4) |
115/230 Vac ± 10%, 50/60 Hz
(factory set at 115 Vac) |
| Input current |
1.2 amps rms max. |
| Intensity control input |
200-600 Vdc |
| Trigger Input |
|
| Trigger |
5 Volt pulse into 4N36 opto-isolator with 150
ohm nominal series resistor |
| Pulse duration (1) |
10 to 100 µsec |
| Environmental Specifications |
|
| Operating temperature |
-10 to + 110ºF (-23 to +43ºC) |
| Shock and vibration |
1.5 G, 5 to 200 Hz per MIL-STD-810C |
Notes:
1) Measured through a 0.5 inch (13 mm) aperture at light output port.
2) Energy at 600 Vdc (E = ½CV2). Discharge capacitor values are: MVS-2020 - 12 µfd, MVS-2060 - 4µfd, MVS-2200 - 1µfd.
3) Approximate values at 1/3 peak.
4) Specify 230 Vac operation if desired.
5) Delay between flash command and light output is µsec typical
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Machine Vision Stroboscope from Monarch Instrument
|
