Positive Displacement, Pump, Type F550, S, Worm Drive, Flux, PumpsFeatures and benefits:

  • recommended for low to high viscosity, pasty, but still free flowing products

  • eccentric worm-drive pump with bearing flange in aluminium

  • with mechanical seal or stuffing box

  • low wear due to low pump speed

  • vertical and horizontal use

  • outer diameter of pump tube 50 or 54 mm

  • Type F 550 SX.-50/21 for use in Zone 0, tested and certified according to ATEX-Directive 94/9/EC, EC-Type-Examination Certificate No. PTB 99 ATEX 4050/4051 X

Positive displacement pump - eccentric worm type: :

  • smooth pumping with very little turbulences

  • low wear, no valves, vanes etc.

  • vertical and horizontal use

Pump Available In :

  • Pump: stainless steel 316 Ti (S)

  • Stator: PTFE, NBR, CSM, FKM

Positive Displacement, Pump, Type F550, S, Worm Drive, Flux, PumpsImmersion length:

  • 27", 39" and 47" mm (other lengths on request)

Drive Motor:

  • Three-phase motor 0,75 or 1,1kW, 930 or 700 min-1, jet-proof to IP 55 or explosion-proof to ATEX

  • Air motor 0,5 - 1,8 kW, 1000 min-1 at 6 bar, explosion-proof to ATEX

    Performance Curve
    Brochure

--- Back to Worm Drive Pumps