Filters, Regulators, and Lubricators (FRL's)

Clean air is a key ingredient that enables effective and efficient use of tools, equipment, and machinery in almost every industry. As such, the use of air preparation devices, such as filters, regulators, and lubricators (FRLs) is an excellent means of keeping your air supply in top condition, as well as enabling your tools and equipment to operate at their peak performance. The new ARO-Flo series FRLs from Ingersoll Rand continue the tradition of offering premium products for your operation, and also raises the bar in the industry for safety, flow performance, and modularity.

 

ARO Filters, ARO Regulators, ARO Lubricators, ARO FRL's

ARO-Flo Compressed Air Filters

ARO-Flo compressed air filters are designed to remove airborne solid and liquid contaminants. Filters can be ordered with different elements, including coalescing models which are capable of removing oil aerosols and particles down to 0.3 micron. Standard filters are sold with 5-micron elements; 40-micron elements can be purchased and installed separately.

Filters Models:

ARO-Flo 1000 | ARO-Flo 1500 | ARO-Flo 2000 | ARO-Flo 3000 | Super Duty Series Filter | Super Duty Coalescing Filter

Download Brochure

ARO Filters, ARO Regulators, ARO Lubricators, ARO FRL's

ARO Air Line Regulators

Air line regulators provide controlled consistent air pressure as required for specific pneumatic equipment connected to the air system. All ARO-Flo regulators are offered with a standard adjustment range of 0-140 psig (0-9.6 bar). Alternative spring ranges are offered for easy conversion to suit different requirements. Non-relieving regulators are offered for applications where the venting of downstream overpressure is undesirable.

Regulators Models:

1000 Series Regulator | 1500 Series Regulator | 2000 Series Regulator | 3000 Series Regulator | Super Duty Series Regulator

Download Brochure

ARO Filters, ARO Regulators, ARO Lubricators, ARO FRL's

ARO-Flo Lubricators

ARO-Flo mist-type lubricators help ensure that pneumatic devices receive the required lubrication to maintain peak performance, reduce wear, and prolong service life. They are designed to provide the correct amount of oil required for most general applications in a pneumatic system, delivering a constant ratio of oil to air flow. Precise oil feed adjustment sets the proper oil drip rate. Lubricators should be installed close to the downstream application to ensure effective distribution of oil.

Lubricators Models:

1000 Series Lubricator | 1500 Series Lubricator | 2000 Series Lubricator | 3000 Series Lubricator | Super Duty Series Lubricator

Download Brochure

ARO Filters, ARO Regulators, ARO Lubricators, ARO FRL's

ARO Filters-Regulators "Piggybacks"

Filter-regulator, or “piggybacks,” combine the functions of both a filter and regulator. Piggybacks are compact and most effective when space is a constraint. Piggybacks can be ordered with different filter elements and can be modified with different springs, depending on the filtration and air regulating requirements.

Filters-Regulators "Piggybacks" Models:

1000 Series Filter-Regulator "Piggyback" | 1500 Series Filter-Regulator "Piggyback" | 2000 Series Filter-Regulator "Piggyback" | 3000 Series Filter-Regulator "Piggyback"

Download Brochure

ARO Filters, ARO Regulators, ARO Lubricators, ARO FRL's

ARO 2-Piece Combination Units

Filters, regulators, lubricators, and piggybacks can be combined together to form combinations. They are typically strung together in the F+R+L arrangement (three-piece combo) and F/R+L (two-piece combo) arrangement, although other configurations are also used depending on application needs. ARO-Flo combination FRLs are easily assembled using modular spacer kits.

2-Piece Combination Units Models:

1000 Series 2-Piece Combination | 1500 Series 2-Piece Combination | 2000 Series 2-Piece Combination | 3000 Series 2-Piece Combination

Download Brochure

ARO Filters, ARO Regulators, ARO Lubricators, ARO FRL's

ARO 3-Piece Combination Units

Filters, regulators, lubricators, and piggybacks can be combined together to form combinations. They are typically strung together in the F+R+L arrangement (three-piece combo) and F/R+L (two-piece combo) arrangement, although other configurations are also used depending on application needs. ARO-Flo combination FRLs are easily assembled using modular spacer kits.

3-Piece Combination Units Models:

1000 Series 3-Piece Combination | 1500 Series 3-Piece Combination | 2000 Series 3-Piece Combination | 3000 Series 3-Piece Combination

Download Brochure

ARO Filters, ARO Regulators, ARO Lubricators, ARO FRL's

ARO FRL Accessories

ARO offers a variety of accessories and replacement parts to enable greater customization and flexibility for your application. Lockout valves, check valves, mounting brackets, manifolds, soft start valves, gauges, and pipe adapters are available in several sizes and configurations to fit your needs.

FRL Accessories Models:

Lock-Out Valve | Check Valve | Modular Clamp Spacer Kit | T-Bracket | L-Bracket | C-Bracket | Manifold Block | Pipe Adapter | Pressure Switch | Soft Start Valve | Gauges

Download Brochure