Barnes, Non Clog, Solids Handling, Submersible PumpsBarnes, Non Clog, Solids Handling, Submersible PumpsBarnes Solids Handling pump series are commonly found in applications involving sewage, effluent, wastewater processing and solids laden media. Available in both standard and explosion proof configurations. Barnes Solids Handling pumps are constructed of durable cast iron with oil-filled motors to provide a pump tough enough to meet almost any application need.

Barnes Non-Clog series of pumps are commonly found in applications involving sewage, effluent, wastewater processing and solids laden media. Available in both standard and explosion proof applications, Barnes Non-Clog pumps are constructed of durable cast iron, oil filled motors providing a pump tough enough to meet almost any application need.

Barnes SH Series

Premium quality solids handling pumps with many specifiable features as standard.

Models:
3SHV 3XSHV
3SHM 3XSHM
4SHV 4XSHV
4SHM 4XSHM
4SHD 4XSHD
6SHV 6XSHV
6SHM 6XSHM
6SHD 6XSHD
8SHTM 8XSHTM
Flows To: 3,400 g.p.m.
Heads To: 265 feet
Discharge: 4 inches
HP: 2 - 60
Voltage: 208-230, 460, 575
RPM: 1150, 1750 or 3450
Max Solids: 3 inch (4 inch on 8 inch discharge pumps
and 2.75 inch on 3 inch discharge pumps)

Applications: Municipal Wastewater Raw Sewage
Features: Superior Solids Passing with Less Clogging
Variable Frequency Drive rated H-Class windings
208/230-460, 575V rated Plug-n-Play 50-foot Cord
Temperature and moisture sensors
50,000 hour minimum bearing life
Stainless Steel lifting bail and hardware
Options: Hard Face Seal materials
Impeller trims to meet specified conditions
Additional cord lengths
Rail systems for easy installation and removal
Break away fittings
Leg kit for free standing applications

Barnes SE Series

Proven design with over 35 years of sewage transport experience at an economical price.

Models:
3XSE 4SE
Flows To: 4,600 g.p.m.
Heads To: 180 feet
Discharge: 3 - 8 inches
HP: 3/4 - 150
Voltage: 115 - 575
RPM: 850, 1150, 1750, 3450
Max Solids: 2 - 4 inch

Applications: General Industrial Raw Sewage
Features: Solids Handling Capacity: 2-4 inches, depending on model
Cast iron construction
Epoxy sealed cord housing with strain relief grommet
40-foot cords
125 lb. flange design
50,000 hour bearing life
Stainless Steel lifting bail and hardware
Options: Temperature sensor available on most models
Moisture sensor available on most models
Hard Face Seal materials
Impeller trims to meet specified conditions
Break away fittings
Additional cord lenths
Rail systems for easy installation and removal

Barnes,Non,Clog,Submersible,Pumps SH Series Brochure
Barnes,Non,Clog,Submersible,Pumps SH Series Overview Brochure
Barnes,Non,Clog,Submersible,Pumps SE Series Brochure
Barnes,Non,Clog,Submersible,Pumps BAF 4x4-4x6 Brochure