Vertical Centrifugal Immersion Pumps by Flux
Vertical,Centrifugal,Immersion,Pumps,Flux
Process Controls Home

 
Vertical Centrifugal Immersion Pumps by Flux
For transferring and circulating corrosive and abrasive fluids:
FLUX Centrifugal Immersion Pumps combine maximum efficiency with a robust and reliable construction resulting in a pump that provides the ulitmate in process security and is ideal for applications in the chemical industry, surface treatment, elctroplating, printed circuit manufacturing, water and wastewater treatment - also in continuous use.

With 4 different design formats within the centrifugal immersion pump range FLUX offer a cost effective, reliable solution for many liquid transfer and circulating operations.

Type F 620 and F 640 Type F 706
Type F 620 and F 640 Type F 706
- with mechanical seal
- for stationary of portable applications
- for typical liquid transfer operations
- in vertical or horizontal version
- Material: stainless steel 1.4571/316 Ti (S)
                 Polypropylene (PP)
                 Polyvinylidenfluoride (PVDF)

Q max. = 44 m³/h
H max. = 33 m water column 		- sealless
- only sleeve bearing in contact with the liquid
- immersion length up to 2000 mm
- Material: Polypropylene (PP)

Q max. = 74 m³/h
H max. = 33 m water column
   
Type F 716 Type F 726
Type F 716 Type F 726
- compact design
- suspended shaft, no seals nor bearing
  in contact with the liquid
- version with support tube or support bars
- suitable for dry operation
- Material: Polypropylene (PP)
                 Polyvinylidenfluoride (PVDF)

Q max. = 45 m³/h
H max. = 35 m water column 		- very robust construction with shaft
   bearing mounted in a pedestal
- suspended shaft, no seals nor bearing
   in contact with the liquid
- version with support bars for continuous use
- suitable for dry operation
- Material: Polypropylene (PP)
                 Polyvinylidenfluoride (PVDF)

Q max. = 45 m³/h
H max. = 35 m water column

Site Designed By Panther Marketing & Design