G&L IRRI-GATOR Model GT Self Priming Centrifugal Pump

IRRI-GATOR, Model GT, Self-Priming, Centrifugal Pumps, Goulds G&L PumpsFeatures:

  • Self-Priming Design: Once pump is initially primed, filled with water, it will reprime when the water level rises above the end of the suction pipe.

  • Serviceable:
    • Back pullout design allows disassembly of pump for service without disturbing piping.
    • Two compartment motor for easy access to motor wiring and replaceable components.

  • Diffuser (Guidevane): Bolt down diffuser provides positive alignment with impeller. F.D.A. compliant, injection
    molded, glass filled Lexan® for durability and abrasion resistance.

  • Impeller: F.D.A. compliant, glass filled Noryl®. Corrosion and abrasion resistant.

  • Corrosion Resistant: Electro-coat paint process is applied inside and out, then baked on.

  • Casing: Cast iron, 4-bolt, back pull-out design. Openings for vacuum gauge and casing drain.

  • Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working
    limits. Can be operated continuously without damage.

  • Mechanical Seal: Carbon/ceramic faces, BUNA elastomers. 300 series stainless steel metal parts. Diaphragm
    prevents the seal from running dry.

Pump Specifications:

  • Pipe connections:
    1½” NPT suction
    1½” NPT discharge

  • Capacities: to 110 GPM at 5 foot suction lift

  • Heads: to 128 feet

  • Reprime capabilities: to 25 feet suction lift

  • Maximum working pressure: 125 PSIG

  • Maximum water temperature: 140° F (60° C)

  • Rotation: clockwise when viewed from motor end.