|
 LB
Booster Pump
-
High Head Water Boosting:
The LB booster pump provides an economical alternative
for small booster sets with flow requirements up to 18
GPM and heads up to 190 feet.
-
Casing: Stainless steel construction
with NPT threaded, centerline connections, easily accessible
vent, prime and drain connections with stainless steel
plugs.
-
Engineered Thermoplastic Internal
Components: Impellers, guidevanes and motor adapters
are high strength and light weight engineered composite.
-
Mechanical Seal: Standard
John Crane type 6 seal with carbon ceramic faces, BUNA
elastomers and stainless steel metal parts.
-
Motors: NEMA standard 48Y
and 56Y open drip proof enclosures with optional single
phase, three phase or 575 volt TEFC configuration.
Product
Bulletin
Instruction
Manual
|
|
 NPV
Vertically Immersed End Suction
-
Superior Materials of Construction:
Complete AISI 300 series stainless steel liquid handling
components for corrosion resistance, quality appearance
and improved strength.
-
High Efficiency Impeller:
Enclosed impeller with unique floating O-ring design maintains
maximum efficiencies over the life of the pump without
adjustment.
-
Casing Features: Stainless
steel construction with NPT threaded, centerline connections.
-
Drive Motors: NEMA standard
open drip-proof, totally enclosed fan cooled or explosion
proof enclosures. Rugged ball bearing design for continuous
duty under all operating conditions.
Product
Bulletin
Instruction
Manual
|
|
 SHV
Vertically Immersed End Suction
-
Superior Materials of Construction:
AISI 300 Series stainless steel for reduced corrosion
and improved strength and ductility.
-
High Efficiency Impeller:
Enclosed impeller with front wear ring maintains maximum
efficiencies over the life of the pump without adjustment.
-
Casing Features: Stainless
steel construction with standard 150 lb. ANSI raised face
flange connections and centerline discharge.
-
Drive Motors: NEMA standard
JM shaft motors in open drip proof, totally enclosed fan
cooled or explosion proof enclosures. Rugged design for
continuous duty under all operating conditions.
Product
Bulletin
Instruction
Manual
|
|
 SVI
Vertically Immersed Stainless Steel
-
Vertically immersed, tank mounted design
reduces operating space.
-
Standard NEMA motors permit a wide variety
of options and fast field service.
-
NPT threads and ANSI flanges connections
easily fit your piping requirements.
-
AISI 304 or 316L stainless steel liquid
end components handle more of your pumping needs.
-
Seal housing design promotes liquid flow
and eliminates entrapped air or heat which could cause
premature failure.
-
Impeller o-ring seal produces high pressure
and efficiency per stage to keep energy costs down.
-
Impeller spacing is automatic for quick
installation and reduced wear.
-
Simplified design for maximum reliability
and faster repair.
Product
Bulletin
|
|
 VB
-
Multi-stage Design: Provides
steady, quiet, vibration free operation.
-
O-ring Casing Seal: Reliable
high-pressure sealing with easy disassembly for maintenance
or repair.
-
Impellers and Diffusers: Glass
filled engineered composite material with floating impeller
design. High resistance to corrosion and abrasion.
-
Bowls: 300 stainless steel
rabbit lock for positive alignment with no Gaskets required.
-
Variable Capacity: Centrifugal
pump design permits selection of flow within a range for
each size.
-
Motors: Close coupled NEMA
56J motors. Totally enclosed fan cooled. Three phase.
Ball bearings carry all radial and axial thrust loads.
Designed for continuous operation.
-
A tank mounting clamp is provided for ease
of adjustment to tank depth.
-
Optional stainless steel suction and discharge.
Product
Bulletin
Instruction
Manual
|
