Grundfos Self-Priming Industrial Pumps: Peerless 8796 Series, LaBour LHLA/LPLA Series

Grundfos, Self-Priming Industrial Pumps, Peerless 8796 Series, LaBour LHLA/LPLA Series, Grundfos PumpsLaBour Back Pull-Out Self-Priming Pumps

All of LaBour’s self-priming pumps operate with the “Hydrobalance Principle”; air is evacuated from suction lines without the use of auxiliary equipment. The LHLA/LPLA series pumps are back pull-out construction and use the ASME/ANSI B73.1 LVA series shaft and power end.

Features

  • Back pull-out feature with an ANSI series bearing frame for ease of maintenance.

  • Every LHL/LPL series pump offers both rapid priming time and high lift capabilities.

  • Inherently self-priming, eliminating the need for check valves, foot valves, and auxiliary priming devices.

  • LHL/LPL design incorporates large diameter ANSI shafts which minimize shaft deflection and reduce mechanical
    seal wear.

  • Circular casing eliminates vapor lock.

  • Component construction enables the user to replace any individual part without replacing the entire unit.

  • Removable basket strainer prevents foreign solids from damaging the pump.

  • All pumps tested for 20h Hg minimum vacuum.

Peerless 8796 Pump

The Peerless Pump 8796 Series pumps are manufactured for a wide range of flow and head requirements and meet the latest ASME specifications. Besides costing less than the competition, the 8796 Series pumps are engineered to lower your operating costs. Save on installation, because these pumps will lift corrosive, toxic, or abrasive liquids from a depth of up to 20 feet without the aid of foot valves, check valves, or auxiliary pumps. Save on inventory costs, because the 8796 back-pullout assembly is completely interchangeable with our 8196 ANSI Series. All 8796 Series Power Ends are backed with Peerless Pump’s three-year warranty.

Applications

The 8796 Series pumps fit a wide range of applications. They will handle acids, chemicals, or volatile liquids. They can pump liquids with large quantities of entrained air or gas, such as condensate systems or industrial waste treatment. The 8796 pump is the best choice for tank car unloading, mine or tunnel de-watering, or for any application where the pump doesn’t have positive NPSH, or has to be locatedaway from or above the liquid source.