Custom Fabricated Strainers
Custom,Fabricated,Strainers
Process Controls Home

 
Custom - Fabricated Strainers
 Fabricated strainers, because they are manufactured one at a time, can be made to fit the exact requirements of the application. There are no trade offs. You get the perfect strainer for you application...you never have to pay for more strainer than you need...or settle for a strainer that won't quite do the job you want it to.

Often it is not necessary to go to the time and trouble to design a strainer from scratch. Hayward has several simplex, duplex and tee type designs of fabricated strainers. Very often one of these basic designs can be used "as is" or slightly modified with a different cover or piping connections to fit the application. Your application might not be as unique as you think. Over the years we have seen thousands of different applications and can often offer a solution to your straining application problem right from our database of special strainer designs.

Introduction to Fabricated Pipeline Strainers
While Hayward offers the world's most complete line of cast strainers, sometimes, because of space limitation, the need for a special alloy, unique piping connections, cover opening system or size, a custom strainer is required. In these cases, a cast strainer will just not work because often it is not easy or even possible to modify the cast metal strainer. Hayward solves these application problems by fabricating a pipeline strainer to meet the requirements of any straining application.

Introduction - Manufacturing Capabilities

| Back To Hayward Industrial
Model 90 Simplex Strainer - 2" to 48"
The Model 90 Simplex Strainer is perfect for applications with unique requirements or standard ones where a cast strainer would not fit or be too heavy. If a standard simplex strainer won't work in your application Hayward can help you design a Model 90 Simplex Strainer to your exact specifications....no compromises.

 Model 90 Simplex Basket Strainers

| Back To Hayward Industrial
 
Models 950 and 900 Duplex Strainers - 1" to 48"
Both the Model 950 and 900 feature two basket strainer housings with a valve flow diverter assembly connecting them. When the basket in one housing is ready for cleaning the flow is switched to the other housing using the valve assembly. The first basket is then removed, cleaned and is ready to be put back into service. The Model 950 has an offset inlet and outlet, with the inlet located above the outlet. The Model 900 has the inlet and outlet in the same plane.

Models 900 & 950 Duplex Basket Strainers

| Back To Hayward Industrial

Model 91 Tee Type Strainer - 2" to 48"
The Model 91 Tee Strainer offers several advantages over other strainer designs. The strainer is very compact, important in applications where space is restricted. Unlike most other strainers the Model 91 can be used in both vertical or horizontal installations and the strainer screen can be cleaned without draining the strainer housing.

 Model 91 Tee Strainers

| Back To Hayward Industrial
 

Model 92 Temporary Strainer - 2" to 24"
Model 92 Temporary Strainers are very low cost, high quality pipeline strainers designed for new system start up service for systems that will not have a permanent strainer installed. Temporary strainers remove damage causing particles present in just put in service" piping systems. They are very easy to install and just as easy to remove when the system is put into service. They are also used in systems where solid contaminants are not thought prevalent but where protection of piping system components is desirable none the less.

 Catalog Information Model 92

| Back To Hayward Industrial


Site Designed By Panther Marketing & Design