|
Hydraulic Systems Analyzers
|
|
|
•
|
A Complete Troubleshooting System: The analyzer consists of a flowmeter, silicone filled pressure gauge, bi-metal temperature gauge and a precision needle load valve. A comprehensive operators manual describes testing of various system components.
|
|
•
|
Metric and SAE Measuring Ranges: These multi-measurement analyzers simultaneously measure flow in GPM and LPM, pressure in PSIG and Bar, and temperature in degrees F and C.
|
|
•
|
Quality Assurance: This system can be part of a predictive maintenance program, allowing strategized pump, valve, motor and cylinder rebuilding.
|
|
|
•
|
Unrestricted Mounting:
Accurate measurements can be taken in any mounting orientation, without the straight pipe required with other analyzer systems.
|
|
•
|
Compact and Rugged:
The complete hydraulic system analyzer is small enough to fit in a tool box and built to withstand tough industrial use.
|
|
•
|
Pin-Point System Problems:
The hydraulic system analyzer and comprehensive troubleshooting manual will save time and money by testing discrete components within the system, eliminating trial and error approaches.
|
|
•
|
Non-Electrical:
No batteries to fail or other electrical power connections to make, this system will provide a lifetime of simple and reliable operation.
|
|
|
|
MATERIALS OF CONSTRUCTION: Wetted Components
|
Component
|
Materials
|
|
High-pressure casing, end ports and tapered shaft
|
Aluminum and Steel
|
|
Seals
|
Buna-N (STD)
|
|
Transfer Magnet
|
Teflon® coated Alnico
|
|
Floating Orifice Disk
|
Stainless Steel
|
|
All other internal parts
|
Stainless Steel
|
|
MATERIALS OF CONSTRUCTION: Non-Wetted Components
|
Component
|
Materials
|
|
Windows
|
Polycarbonate and Glass
|
|
Window Seals
|
Buna - N
|
Teflon, Viton and Kalrez are registered trademarks of duPont de Nemours & Co.
|
PERFORMANCE:
|
•
|
Measuring Accuracy:
Flow measurement accuracy of ±4% of full-scale Pressure measurement accuracy of ±2% of full-scale Temperature measurement accuracy of ±1% of full-scale.
|
|
•
|
Repeatability: ±
1% of full-scale
|
|
•
|
Flow Measuring Range:
0.05-150 GPM (0.2-560 LPM) see Guide to Standard Monitors for specific ranges
|
|
•
|
Maximum Operating Pressure:
Aluminum monitors: 3000 PSIG (200 Bar)
|
|
•
|
Maximum Operating Temperature:
240ºF (116ºC)
|
|
•
|
Pressure:
0-3000 PSIG (0-200 Bar)
|
|
•
|
Temperature:
0-250ºF (-20-120ºC)
|
|
•
|
Standard Calibration Fluids:
Oil monitors: DTE 25 @ 110ºF (43ºC), 0.873 sg
|
|
|
MECHANICAL:
|
|
|
|
|
DIM
|
Series 3
1/2" NPTF
|
Series 4
3/4" NPTF
|
Series 4
1" NPTF
|
Series 5
1-1/4" NPTF
|
|
A
|
10-1/2"
(266 mm)
|
11-1/2"
(292 mm)
|
13"
(330 mm)
|
16-1/2"
(420 mm)
|
|
B
|
4"
(100 mm)
|
4"
(100 mm)
|
4-1/4"
(108 mm)
|
5-1/4"
(133 mm)
|
|
C
|
5-1/2"
(140 mm)
|
6-1/2"
(165 mm)
|
6-1/2"
(165 mm)
|
8"
(200 mm)
|
|
Port Sizes
|
NPTF: 1/2"
|
NPTF: 3/4"
|
NPTF: 1"
|
NPTF: 1-1/4"
|
|
