Bascom-Turner Gas-Sentry CGA-501 Combustible Gas, CO/H2S and Oxygen Monitor
Gas-Sentry Model CGA-501
Continuous Gas Monitor for Utility Service Personnel
Accurate, compact and rugged, continuous monitor specifically designed for utility service personnel to test an enclosed space atmosphere prior to entry and monitor it after entry.
The CGA-501 monitors combustible gas, carbon monoxide and hydrogen sulfide, and oxygen. All four gases are monitored continuously while the display shows the concentration of a particular gas selected by a front panel switch. The unit alerts audibly and visually if one or more gases are outside their alarm limits. The CGA-501 can be automatically zeroed and calibrated on the AUTOZERO scale in under 60 seconds with gas delivered either manually or by an automatic gas dispenser.
Long-lived sensors, a conformally coated circuit board, and a tough, high impact ABS case stand up in the field.
The monitor comes with a standard 6 inch probe with dust and water block filter on a 5 foot straight hose with a quick connect fitting, a breath zone probe with collar clip on a 2 foot hose with a quick connect fitting, a manual, a laminated short guide to operation, a set of batteries, carryall, and a shoulder strap. Also included is:
Lifetime Limited Warranty
There is a lifetime limited warranty on the monitor's electronics and a three year limited warranty on sensors applicable to monitors and sensors in the USA. The pump and accessories are warranted for one year.
For additional toxic gas detectors see: