Digital,Tachometer,Stroboscope,Check,Line

Digital Tachometer Stroboscope
from Check-Line

 Digital Tachometer Stroboscope from Check-Line

Digital Tachometer Stroboscope

DT-311A
(115 v AC or 230 V AC)

DT-315A

(Internal battery, 12 V DC or AC Adapter
)
Unit can be operated on AC power, using the supplied AC-Adapter, while the battery is being recharged


DT-315AEB
(External battery pack or 12 V DC )
This version permits the end-user to always have a spare, fully-charged battery for uninterrupted service

54-33,000 RPM/FPM

Portable, highly stable and accurate, industrial-quality tools for non-contact RPM measurement, inspection and observation of moving parts by "freezing" or "slowing down" the action.


Features
Highest accuracy and most stable flash rate

Easy-to-read LED display

Easy-to-operate controls

Detachable pistol-grip handle

Provides 12 V DC power for external sensors

Accepts external trigger input and provides synchronizing pulse output

Phase shift for best view and flash photography

Flash rate control

Instant double and half-rate flash selection for error-free reading

Accessories


Specifications

Flash Range 100-30,000 FPM
Accuracy
  Internal Mode:
  External Mode:

±0.01% of reading
±0.01% or ± 1 digit
Drift ±0.01% per degree C
Update Time
  Internal Mode:
  External Mode:

0.2 seconds
±0.01% or ± 1 digit
Output Signal Synchronous, 400 µs pulse,
0 to approx. ± 12 V DC
1000 ohms impedance
Display & Rate Divide or multiply by 2, selectable
Low Battery Indicator Display shows L's
Operating Temperature 32-104° (0-40°C)
Display 5 digits, 10 mm high, red LED
Flashtube Xenon, 10 W maximum
Flash Duration 10-30 µs
Sensor Power Supply 12 VDC ± 0.5V (50ma)
EXTERNAL MODE ONLY
Phase Shift 0 - 359° with 1° resolution or
0 - 333 ms from 200 - 3,000 FPM
Input Signal Req'd for
External Triggering
5-24 V P-P (not to exceed 35 V to GND)
pulse width 50 µs minimum, rise time less than 0.2 ms
Input Impedance 10,000 ohms
Model Power Requirements
DT-311 115 V or 230 V AC (specify), 50/60 Hz, 30 VA
DT-315 115 V AC or 230 V AC Adapter or one (1) hour, internal, rechargeable 12 V battery or external 12 V DC
DT-315EB Three (3) hour, external, rechareable 12 V DC Power Pack or external 12 V DC
Model Access.
Included
Batt Life
(charged)
Full Charge
Time
Dimensions Weight
DT-311 - N/A N/A 4.7 x 4.7 x7.2"
(120 x 120 x 183mm)
2.6 lbs.
(1.2 kg)
DT-315 Internal battery, 12 V DC
with 115 V AC or 230 V
AC Adapter Charger
1 hour at
high flash
rate
16 hours 4.7 x 5.6 x 9.7"
(120 x 141 x 248 mm)
4.4 lbs.
(2 kg)
DT-315EB External battery pack,
12 V DC, with 115 V AC
or 230 V AC Charger &
carrying case
3 hour at
high flash
rate
16 hours 4.7 x 4.7 x7.2"
(120 x 120 x 183mm)
4.5 lbs.
(2 kg)

 
Digital Tachometer Stroboscope
from Check-Line

Site Designed By Panther Marketing & Design