| DISPLAY UNIT SPECIFICATIONS |
|
|
Display |
Bright LCD 5 digit and 5 Alphanumeric Characters, Backlit, "on-target" indicator, low-battery indicator, Hold function. Memory 10 measurements. Minimum and Maximum reading recall |
| Accuracy |
depends upon Sensor Module |
| Power |
2 x "AA" Batteries |
| Dimensions |
6.75 x 2.25 in (72 x 58 mm) |
| Weight |
4 oz. (0.15 kg) |
| Options |
RS-232 or TTL output, N.I.S.T. certificate of calibration depending upon Sensor Module |
| LASER TACHOMETER SPECIFICATIONS |
|
|
Laser Tachometer |
Display Unit and Non-contact Laser Tachometer Sensor Module |
| Range |
5 to 200,000 RPM |
| Resolution |
0.1 (0 to 9,999 RPM)
1.0 (10 k to 99 k RPM)
10 (above 100k RPM) |
| Accuracy |
+ 0.01% of reading |
| Target Distance |
up to 15 feet and 45 degrees offset |
| Select |
RPM or RPS |
| Options |
N.I.S.T., TTL output, RS232 output |
| CONTACT TACHOMETER SPECIFICATIONS |
Contact Tachometer Sensor Module pictured with optional 12" wheel
|
Contact Tachometer |
Display Unit, Concave , Convex Tips and 10 CM Wheel. 12 inch circumference wheel is available as an option |
| Range |
5 to 15,000 RPM |
| Resolution |
Fixed or Auto-ranging to .0001 |
| Accuracy |
+ 0.01% of reading (RPM) |
| Select |
inches/feet/yards/centimeters/meters per second/minutes/hours and miles per hour. Totalize in imperial or metric units. |
| Options |
12 inch circumference wheel |
| DUAL CONTACT THERMOMETER |
Contact Temperature Sensor module pictured with optional 36 inch wire thermocouple, K-type
|
Dual Contact Thermometer |
Display Unit and Dual Probe Contact Thermometer (pictured with optional probes) |
| Display |
T1, T2, DT, (T1-T2) or (T2-T1) |
| Range |
K Type - 200 to 2500° F
J Type -200 to 1800° F |
| Resolution |
0.1 or 1.0 degree |
| Accuracy |
+ 1% of reading + 1° F (0.5° C) typical at 25° C ambient |
| Select |
Thermocouple Type J or K
and
°C or °F |
| HUMIDITY AND THERMOMETER SPECIFICATIONS |
|
|
Humidity and Thermometer |
Display Unit and Humidity and Thermometer Sensor Module |
| Humidity Range |
10 to 95% RH |
| Resolution |
0.5% RH |
| Accuracy |
+ 2% RH of reading at 25° C |
| Response Time |
10 seconds |
| Temperature Range |
0 to +80° C (32 to +175° F) |
| Resolution |
0.1° |
| LED STROBELIGHT SPECIFICATIONS |
|
|
LED Strobelight |
Display Unit and LED Strobelight Sensor Module |
| Range |
60 to 50,000 Flashes/min. |
| Resolution |
1.0 FPM (0.01 Hz) |
| Modes |
FPM, FPS or Flashlight |
| Features |
Bright White LEDs for stop-motion/slow-motion inspection. 10 User presets, multiply by 2, divide by 2, recalls last settings. Adjustable focus. |
| INFRARED THERMOMETER |
|
|
Range |
0 to 750°F (-18 to 400°C) |
| Accuracy |
±2% or 4° F (2° C) |
| Resolution |
1° F (0.5° C) |
| Target/Distance |
12:1 |
| Spectral Response |
8-14 Micrometer |
| Emissivity |
Adjustable 0.10 to 1.00
|
