|
Self Powered Sensors
 The unique SPS Series provide a TTL compatible pulse output from any of our four input sensors. The TTL output is switch selectable positive going 0-5V or negative 5-0V pulses provided at the BNC connector. Internal rechargeable batteries provide 7 hours of portable operation. All SPS configurations can be powered by 115 Vac, 239 Vac or 5-12Vdc.The SPS Series makes use of Monarch's sensors combined with the Interface module (SPS-IM) and one of three power sources.
Applications:
Self-Powered Sensors can provide one pulse per revolution triggers for vibration, spectrum and waveform analyzers, data acquisition equipment, stroboscopes, balancing machines and recorders.
|
|
Self-Powered Series Specifications
Range (RPM)-Same as the sensor
Output signal-TTL compatible pulse, 0-5V or 5-0V
Pulse Width-Determined by size of target and rotational speed
Output connector-BNC Connector
Power (4) "AA" (R6) NiCad batteries AC or 5-12 VDC
|
|
|
|
Self-Powered Sensors Ordering Information
|
ITEM NO.
|
MODEL
|
CE
|
DESCRIPTION
|
|
6150-010
|
SPS-5/115
|
X
|
Interface Module with BNC output connector, ROS-5P sensor and R-5 (115 Vac) recharger/power supply
|
|
6150-011
|
SPS-5/230
|
X
|
Same as SPS-5/115, but with R-6 (230 Vac) recharger/power supply
|
|
6150-012
|
SPS-5/12
|
X
|
Same as SPS-5/115, but with tinned leads for 5 to 12 Vdc power and no recharger/power supply
|
|
6150-015
|
SPLS-5/115
|
X
|
Interface Module with BNC output connector, RLS-5P sensor and R-5 (115 Vac) recharger/power supply
|
|
6150-016
|
SPLS-5/230
|
X
|
Same as SPLS-5/115, but with R-6 (230 Vac) recharger/power supply
|
|
6150-017
|
SPS-IM |
X
|
Interface Module with BNC output connector - Order sensor and recharger separately |
Accessories:
| ITEM NO. |
MODEL |
CE
|
DESCRIPTION |
| 6180-050 |
ROS-5P* |
X
|
Remote Optical Sensor with 8 foot cable and mounting bracket |
| 6180-011 |
RLS-5P* |
X
|
Remote Laser Sensor with 8 foot cable and mounting bushing on base |
| 6180-015 |
IRS-5P* |
X
|
Infrared Sensor with 8 foot cable |
| 6180-017 |
MT-190P* |
X
|
Magnetic Trigger Sensor/Amplifier with 8 foot cable |
| 6180-028 |
EC-25P |
|
25 foot Extension Cable for remote sensors with male/female 1/8" phone plug connectors |
| 6180-060 |
R-5 |
X
|
Recharger, 115 Vac - 50/60 Hz |
| 6180-062 |
R-6 |
X
|
Recharger, 230 Vac - 50/60 Hz |
| 6180-064 |
B-4 |
|
Four "AA" Rechargeable NiCad Batteries |
| 6180-070 |
T-5 |
|
Reflective Tape - 5 Foot Roll, 0.5 inch wide |
*Sensors are available with other cable lengths of 15, 30 or 50 feet.
|
|
