|
Test flue gases and home or office spaces for the presence and location of a carbon monoxide leak with the 705. This instrument fits comfortably in your hand and operates with just the push of a button.
Easily operate the 720 with one hand to detect presence of combustible gases. Audible and visual indicators help pinpoint leak source. Adjustable “tic” rate helps eliminate background gas concentration in contaminated environments.
|
The small, lightweight HXG-2 is truly portable. High sensitivity helps pinpoint the smallest leak quickly and accurately. Calibrated alarm indicates dangerous concentration of combustible gases. Use with Hetkit and AGA approved protocol to test for cracked heat exchanges.
Use the 710 to test flue gases in furnaces and domestic boilers in order to determine safe operation efficiency. Real time/date documentation for future reference.
|
The 735 Combustible Plus® is “the best value in gas detection.” Easy operation with narrower grip diameter adds comfort. Use the 735 to inspect and investigate gas leak survey work in confined space, emergency applications and vessel testing.
Calibration Options
• Calibration services are available at TPI’s full service repair and technical center.
• In-field calibration kits available. 800.368.5719
|
|
Ask about TPI’s custom kit packages and our complete line of cULus 3111 listed digital multimeters and clamp-on meters...
Team a Digital Multimeter with a Carbon Monoxide Accessory and other TPI adapters/ accessories for a complete trouble shooting kit.
 Aspirator Bulb Accessory for A701/A702 and A711
Attaches directly to your CO accessory, enabling quick and easy sampling of flue gas.
|
Users
700 Series Goes to Work With:
Utilities Inspectors
Maintenance Engineers
Fire Inspectors and Investigators
Safety Inspectors
Water/Sewer
Departments
Home Inspectors
Heating Contractors
Utility Contractors
Industrial Plant
Personnel
Propane Marketers
|
Use a DMM and A701 to measure carbon monoxide (CO) in ambient air
• Use with any DMM with a minimum 3 1/2 digit LCD, 2 or 4 Volt DC range and 10M or greater input impedance.
• Detect CO levels to1999 ppm, with resolution as low as 0.1ppm and ±5%  of reading.
• Low Battery Indication.
• Calibrate in the field.
Other models available:
• A702 has built in alarm.
• A711 has push button zero.
|
 |
Heat Exchanger Test Kit
Combine the HXG-1 and the HETKIT® to test for cracks in residential furnace heat exchangers. Replaces CO analyzers as the best alternative to test heat exchanger integrity.
• More safe, advanced and reliable than smoke bomb, spray solution and odorant methods.
• The HETKIT® method is based on the Gas Research Institute Procedure #84/0162 developed by the American Gas Association.
• Low initial cost and low cost per test.
* HXG-1 or HETKIT® may NOT be used alone to complete test of heat exchangers.
|
