Split Core Current Transducers CR4210, CR4211

Split Core, Current Transducers, CR4210, CR4211The CR4210 and CR4211 Current Transducers are self powered. These transducers are calibrated to provide a 0-5 VDC and 0-10VDC signal that is proportional to the average RMS input AC current. Designed for multi-point current sensing, these devices provide excellent features in a high value package.

 

Wire Mounted Current Indicator
Wire Mounted Current Indicator
Wire Mounted Current Indicator
  • Relatively low cost
  • DIN rail or panel mount
  • Interfaces with most commercially available instrumentation
  • Connection diagram printed on case
  • Supply Voltage: 24 Vdc ±10%
  • Output Load: 4-20 mA dc - 0 to 300 W, 0-5 Vdc - 2K W or Greater
  • Thermal Drift: 500 PPM/°C
  • Cleaning: Water-dampened cloth
  • MTBF: Greater than 100 K hours
  • Frequency Range: DC, DC to 4KHZ, 20 Hz - 5 KHz
  • Altitude: 2000 meter max.
  • Insulation Voltage: 2500 Vdc
  • Relative Humidity: 80% for temperatures up to 31°C and decreasing linearly to 50% at 40°C
  • Polution Degree: 2
  • Installation Category: CAT II
  • Operating Temperature: 0°C to +60°C
  • Response Time: 250 ms max. 0-90% FS (0.25 ms for CR5410S)
  • Calibration: True RMS Sensing, Average RMS, DC
  • Basic Accuracy: 1.0%
  • Multi-point current sensing and control panels
  • Monitor motor faults
  • Monitor heating elements
  • Monitor lighting elements
CR Magnetics Current Transducer Catalog
CR Magnetics Current Transformer Catalog
CR Magnetics Commercial & Metering Class Current Transformers

 


 


Heaters Controls And Sensors Products