Veritcal Mounting, PCB Current Transformers CR8349

Veritcal Mounting, PCB, Current Transformers, CR8349The CR Magnetics CR8349 series electrical current transformers are available in both wire lead and printed circuit board styles. The PCB styles are mountable for automated assembly and feature a non-symmetrical mounting hole pattern to ensure correct orientation.

 

Core material is a high grade laminated nickel alloy material to provide very low ratio error and phase angle error. The CR8300 series of transformers is designed to meet requirements of IEC 1036 and ANSI C12 for electric metering. They are designed to operate in 50 or 60 Hz systems.

 

Wire Mounted Current Indicator
Wire Mounted Current Indicator
Wire Mounted Current Indicator
  • Low cost
  • 4 standard sizes
  • Non-symmetrical mounting pattern
  • Silicon Steel & Nickel Alloy cores available
  • Case Material: Polypropylene Resin
  • Construction: Epoxy Encapsulated
  • Operating Temprature: -25°C to +66°C
  • Insulation Resistance: 100 M ohms @ 500 Vdc
  • High Potential: 1500 volts x 1 minute
  • Frequency: 50 to 400 Hz
  • Silicon Steel cores provide moderate accuracy and lower cost for applications such as current measurement and current relaying.
  • Nickel Alloy cores are for applications that require highest accuracy with minimal phase angle error and are higher in cost. Applications would include power and energy monitoring devices.
CR Magnetics Current Transducer Catalog
CR Magnetics Current Transformer Catalog
CR Magnetics Commercial & Metering Class Current Transformers

 


 


Heaters Controls And Sensors Products