EasyLog EL-USB-3 USB Voltage Data Logger

This standalone EasyLog EL-USB-3 USB Voltage Data Logger measures and stores up to 32,510 voltage readings over a 0-30V d.c. measurement range. The user can easily set up the logging rate and start time, and download the stored data by plugging the EasyLog EL-USB-3 USB Voltage Data Logger into a PC’s USB port and running the purpose designed software under Windows 2000, XP and Vista (32-bit). The data can then be graphed, printed and exported to other applications. The EasyLog EL-USB-3 USB Voltage Data Logger is supplied complete with a long-life lithium battery. Correct functioning of the unit is indicated by flashing red and green LEDs. The EasyLog EL-USB-3 USB Voltage Data Logger features a pair of screw terminals and is supplied complete with a set of measurement leads terminating in crocodile clips.

• 0-30V d.c. measurement range

• Logging rates between 1s and 12hr

• Stores 32,510 readings

• Connection via two screw terminals

• USB interface for set-up and data download

• User-programmable alarm thresholds

• Status indication via red and green LEDs

• Supplied with replaceable internal lithium battery and Windows control software

Windows Control Software

EasyLog USB control software is supplied free of charge with each data logger. Easy to install and use, the control software runs under Windows 2000, XP (Home and Professional Editions) & Vista (32-bit). The software is used to set-up the data logger as well as download, graph and export data to Excel. The software allows the following parameters to be configured:

• Logger name

• Logging rate (1s, 10s, 1m, 5m, 30m, 1hr, 6hr, 12hr)

• High and low alarms

• Start date and start time

The latest version of the control software may be obtained free of charge contact hcs@hcs77.com

LED Flashing Modes

EL-USB-3 features a red and a green LED.

By default hold is disabled. In this mode the red LED will no longer continue to flash after the logged reading has returned to normal from an alarm condition.

Hold can be turned on via the control software. In this mode the red LED that indicates an alarm condition will continue to lash, even after the logged reading has returned to normal. This feature ensures that the user is notified that an alarm level has been exceeded, without the need to download the data from the logger.

EasyLog EL-USB-3 USB Voltage Data Logger Brochure