Multifunction Digital Transducer Single Phase CRD5110

Loop-Powered, AC, Voltage Transmitters, CR4640The all new CR Magnetics Data Stream Series of Electrical Properties Transducers are the most advanced electrical sensing products available in the industry. Voltage, Current, Power, Power Factor, Energy and Frequency can all be monitored in a single package. The sensed information is then provided to the system via an RS485 serial bus.

 

Constructed in a DIN Rail mount package, this series is available in multifunction (CRD5100) and voltage and current only (CRD4500, CRD4100) devices. A simple set of ASCII based commands controls all functions of the transducer. A low cost RS485 to RS232 converter can help the user control up to 256 devices with a single RS232 connection.

 

Wire Mounted Current Indicator
Wire Mounted Current Indicator
Wire Mounted Current Indicator
  • Heart Beat and Communication Indicators
  • Pre-Calibrated with Non-Volatile Memory
  • RS485 Output
  • Current Input up to 25 AAC
  • Voltage Input up to 300 VAC
  • Single or Three Phase
  • DIN Rail or Surface Mount
  • Basic Accuracy: 0.5%
  • Frequency 45 to 65 Hz
  • Continuous Overcurrent: 10 times Full Scale
  • Continuous Overvoltage: 2 times Full Scale
  • Isolation Voltage: 2500 VDC
  • Supply Voltage: 24VDC +/- 5%
  • Supply Power: Less than 250 mWatts
  • Output ESD Protection: +/- 15KV
  • Output Resolution: 16 BIT
  • Operating Temperature: 0 to 50 C
  • Sub-Metering Energy Measurement
  • Motor Loads
  • Remote Monitoring
  • Automatic Control Systems
  • Load Shedding
CR Magnetics Current Transducer Catalog
CR Magnetics Current Transformer Catalog
CR Magnetics Commercial & Metering Class Current Transformers

 


 


Heaters Controls And Sensors Products