Regulators,Indicators,Delta OhmRegulators,Indicators,Delta OhmRegulators,Indicators,Delta OhmRegulators,Indicators,Delta OhmRegulators,Indicators,Delta Ohm


Regulators And Indicators from Delta Ohm

Regulators And Indicators HD 9022

The microprocessor-controlled panel instrument HD 9022 is an indicator with alarm thresholds that may be programmed and configured by the user. At input it accepts signals arriving from transmitters with 2 or 3 wires, in voltage 0÷1V, 0÷10V or in current 0-20 mA, 4-20 mA, or Pt100 with 4 wires. Configuration is always completely present in the instrument, no additional cards are required. The choice for the configuration of the input signals is made by means of the keyboard on the front of the instrument. The dimensions of the instrument are 96x48 mm with depth 145 mm in conformity with DIN 45700. The mode of operation of the HD 9022 is chosen depending on the application, configuring the instrument with the keyboard. The instrument may also be reconfigured with absolute simplicity on the field in order to adapt it to changes in processing requirements. The configuration involves the input, the scale range, the set point and the auxiliary outputs.

HD 9022

Regulators,Indicators,Delta Ohm

Regulators And Indicators DO 9404

The dual regulating indicator DO 9404 is a microprocessor-controlled panel instrument with LED 96x96, with thresholds and alarms that may be programmed and configured by the user. In the two input channels it accepts signals coming from two distinct transmitters or from a double transmitter. The transmitters may be passive with 2 wires or active with 3 wires, in voltage 0-1 V, 0-5 V, 0-10 V or current 0-20 mA; 4-20 mA.

For both input channels the configuration possibility is always present in the instrument, no extra cards are needed.The choice of configurations for the input signals is made on the keyboard located on the front of the instrument.

The DO 9404 is provided with a serial output RS232C, the baud rate may be configured by means of the keyboard, the control is bi-directional and the output connector is a SUB D female 9-pole connector.

The instrument dimensions are in accordance with DIN 45700, 96x96 mm, depth 120 mm. The operating mode of the DO 9404 is chosen according to the application, configuring the instrument with the keyboard. It is possible to configure the instrument on the field with maximum simplicity to adapt it to changes in the process requirements.

The configuration possibility concerns the inputs, the extent of the scales, the set points, the alarms and the baud rate.

DO 9404

Regulators,Indicators,Delta Ohm

Regulators And Indicators HD 4049 - HD 5052 - HD 404

78X48 OR 96X96 PANEL REGULATORS FOR CONNECTION TO DELTA OHM TEMPERATURE AND RELATIVE HUMIDITY TRANSMITTERS WITH INPUT 4÷20 mA

MODELS: HD 404, HD 4049

CHARACTERISTICS SHARED BY THE VARIOUS MODELS:
- Resolution: 0.1°C, 0.1% R.H.
- DispIay: red LEDS, height 12.7 mm
- Precision: instrument onIy ±0.1
- Power suppIy: 12÷24 V
- Relay contacts for the reguIators: Clean exchange contact 3A/220 Vac resistive
- Electronics working temperature: -5...50°C

HD 4049 - HD 5052 - HD 404

Regulators,Indicators,Delta Ohm

Regulators And Indicators HD 3020

TEMPERATURE REGULATORS SERIES HD 3020 WITH DIN RAIL ATTACHMENT
- Easy to install, no holes on the panel
- Small bulk, only 52.5 mm (corresponding to 3 DIN modules)
- Large measuring range: -50°C...+150°C
- Version using different sensors: “KTY81, Pt100”
- The same regulator may be used for both heating and cooling
- Hysteresis adjustable from 0.5°C...6°C, in the regulators
- ON/OFF regulation
- Display: red LEDS, height 10 mm
- Power supply: 24 Va.c.
- Working temperature: -5°C...+50°C

HD 3020

Regulators,Indicators,Delta Ohm

HD 4030 - HD 4030BM - HD4044 - HD 4045

Regulators,Indicators,Delta Ohm

HD 4032 - HD 4034

Regulators,Indicators,Delta Ohm

HD 2601V.1 - HD 2601V.2

Regulators,Indicators,Delta Ohm

Hirotronix,Sensors,Solutions,Inc

Site Design: Process Controls And Instrumentation