Speed Controllers, Phase Controllers, DoldPCB,Safety,Relays,DoldPCB,Safety,Relays,DoldPCB,Safety,Relays,DoldPCB,Safety,Relays,Dold

Speed Controllers and Phase Controllers From DOLD

In particular for easy speed adjustment of fans and pumps DOLD developed a range of 1- and 3-phase speed controllers. Their function principle is based on the phase-angle control by thyristors.

Advantages

... at a glance

  • Long service life by wearless switching
  • Improved operational reliability by integrated electrical interlock
  • Time-saving: easy start-up by potentiometers, independent of software
  • Easy overview on machine condition by diagnostics
  • Cost-saving: the BI 9254 can often be used instead of a frequency converter
  • Space-saving and easy-to-wire: all functions within one enclosure

Technology

DOLD reversing contactors - dead easily to handle

Electrical interlock

An integrated electrical interlock of the both directions of rotation ensures a troublefree and safe operation of your plants.

Exact zero-voltage switching

Switching of the semiconductors in the zero crossing of the alternating system voltage avoids EMC problems in neighbouring equipment.

No need of a very quick acting fuse

In principle a solid-state reversing contactor should be protected against short-circuit by a specific very quick acting fuse. This is to be selected on the basis of the semiconductor’s I²t value indicated in the data sheet. In practice, however, you can do without such a fuse. Then, the device must be protected by a commercially available motor protection switch.

Ready-to-use products for your applications

With optimized parameters such as heat sink size, EMC, heat dissipation etc. To select the product which is best suited for your application it is enough to know the current flowing through your load.

Innovative technology

Switching of high load currents results in considerable heating of semiconductior contactors and relays. Inacceptable temperature rises may cause device failures after a time. To counteract this risk DOLD developed advanced technologies. Thanks to the DCB (Direct Copper Bonding) method it is possible to optimize heat dissipation in the power output element of the semiconductior contactors and relays and to ensure the operational reliability of your systems.

Applications

... Application areas of reversing contactors include

  • Extrusion and injection moulding machines
  • Feed devices, e.g. in wood industry
  • Servodrives in process technology
  • Sewage treatment plants
  • Carwash installations
  • Materials handling
  • Gate controls
  • Pumps
Speed controllers and phase controllers
Function
Power [kW]
controlled
phases
Diverse
signalling
outputs
Ext.
start
signal
Temperature
monitoring
housing Style:
Width [mm]
Type
1-phase AC- motors 230 V
3 AC-Motoren 400 V
with analog control
4-20mA; 0-10V
0.3
1
+
+
Distribution board: 53
Standard
1.5
1
+
+
+
for outdoor installation:
100; 122
Standard
5.5
3
+
+
+
for outdoor installation:
100; 122; 168

Site Designed And Maintained By Panther Marketing And Design